Page 287 - Principles of Applied Reservoir Simulation 2E

272 Principles of Applied Reservoir Simulation

IVPMAP Control code for printing seismic compressional velocity
(Vp) array.
IZMAP Control code for printing seismic acoustic impedance array.
IRCMAP Control code for printing seismic reflection coefficient array.
IVSMAP Control code for printing seismic shear velocity (Vs) array,
IVRMAP Control code for printing seismic velocity ratio Vp/Vs array.

Code Value Meaning
0 Do not print the array
1 Print the array
2 Print the array and a digital contour plot
NOTE: If IVRMAP > 0, time-dependent arrays will be
appended to file WTEMP.ARR.

6 DT, DTMIN, DTMAX
DT Starting timestep size (days). DT may vary between DTMIN
and DTMAX when automatic timestep control is invoked.
DTMIN Minimum timestep size allowed (days). A typical value is
1 day.
DTMAX Maximum timestep size allowed (days). A typical value is
30 days.

25.2 Well Information

Omit this section iflWLCNG = 0.

1. Heading Up to 80 characters.

2. NWELLN, NWELLO
NWELLN Number of new wells for which complete well information
is entered.
NWELLO Number of previously defined wells for which new rates
and/or rate controls are entered.