Page 243 - Principles of Catalyst Development
P. 243

REFERENCE  BOOKS  AND  JOURNALS                                  233
           10.19.  Prins, R., and Schuit, G. C. A. (Editors), Chemistry and Chemical Engineering of Catalytic
                 Processes,  Sijthoff and  Noordhoff, Germantown  (1980).
           10.20.  Rase,  H.  F.,  Chemical  Reactor  Design for  Process  Plants,  Vols.  1 and  2,  John  Wiley,
                 New  York (1977).
            to.21.  Rose,  L.  M.,  Chemical  Reactor Design  in  Practice,  Elsevier,  New  York  (1981).
            10.22.  Shah, Y. T., Reaction Engineering in Direct Coal Liquefactions, Addison-Wesley Publish-
                ing Co.,  Reading,  Massachusetts (1981).
            10.23.  Smith, J.  M.,  Chemical Engineering  Kinetics,  McGraw-Hill, New York  (1980).
            to.24.  Tarhan,  M.  0., Catalytic Reactor Design,  McGraw-Hili,  New  York  (1983).
            to.2S.  Westerterp, K.  R., van Swaaij, W.  P.  M., and Beenackers, A. A. C. M., Chemical Reactor
                 Design and Operation,  John Wiley,  New  York (1984).


            11.  PROCESS  DESIGN

            11.1.  Aerstin,  F.,  and  Street,  G.,  G.,  Applied Chemical  Process  Design,  Plenum  Press,  New
                York (1978).
            11.2.  Benn, F.  R.,  Edewar, J. 0., and McAuliffe, C. A.,  Production and Utilization of Synthetic
                 Fuels,  John Wiley,  New York  (1981).
            11.3.  Cooler, B.  R.  (Editor), The Science imd Technology of Coal and Coal U;i1ization,  Plenum
                 Press,  New  York  (1984).
            11.4.  Gary,  J.  H.,  and  Handwerk,  G.  L.,  Petroleum  Refining,  Technology  and  Economics,
                Marcel  Dekker,  New  York  (1975).
            11.5.  Hahn,  A.  V.  G.,  The  Petroleum  Industry:  Market  and Economics,  McGraw-Hill,  New
                York  (1970).
            11.6.  Hobson,  G.  D.,  and  Pohl,  W  (Editors),  Modern  Petroleum  Technology,  Part  1 and  2,
                John  Wiley,  New  York  (1984).
           11.7.  Holland, F.  A., Watson, F.  A., and Wilkinson, J.  K.,  Introduction  10  Process  Economics,
                John  Wiley,  New  York  (1984).
           1l.8.  Husain, A.,  Chemical Process  Simulation, John Wiley,  New  York  (1986).
           11.9.  Jawad,  M.  H.,  and  Farr,  J.  R.,  Structural Analysis and Design  of Process  Equipment,
                John  Wiley,  New  York  (1984).
           11.10.  Jelel, F. C. (Editor), Cost and Optimization Engineering, McGraw-Hili, New York (1970).
           11.11.  Kenney,  W.  F.,  Energy  Conservation  in  the  Process  Industries,  Academic  Press,  New
                York  (1984).
           11.12.  Newman, S.  A.,  Shale  Oil  Upgrading  and Refining,  Butterworths,  London  (1983).
           11.\3.  Mangold,  E.,  Muradaz,  M.  A.,  and  Cheremisinoff,  P.  N.,  Coal  Liquefaction  and
                Gasification  Technologies,  Butterworths, London (1982).
           11.14.  Mecklenburgh, J.  c.,  Process  Plant  Layout, John Wiley,  New  York  (1985).
           11.15.  Rider,  D.  K.,  Energy:  Hydrocarbon  Fuels  and  Chemical  Resources,  John  Wiley,  New
                York  (1981).
           11.16.  Sharp, D.  H., and West, T.  F.  (Editors),  The Chemical Industry, John Wiley,  New York
                (1982).
           11.17.  Shreve,  R.  N.,  and  Brink, Jr.,  J.  A.,  Chemical  Process  Industries,  McGraw-Hill,  New
                York  (1977).
           11.18.  Speight, J.  G.,  The  Chemistry and Technology of Petroleum,  Marcel  Dekker,  New  York
                (1980).
           11.19.  Stratton,  A.  (Editor),  Energy  and  Feedstocks  in  the  Chemical  Industries,  John  Wiley,
                New  York  (1983).
           11.20.  Waddams, A.  L.,  Chemicals from  Petroleum,  John  Wiley,  New  York  (1973).
   238   239   240   241   242   243   244   245   246   247   248