Page 182 - Process Modelling and Simulation With Finite Element Methods

Extended Multiphysics 169
Pull down the Boundary menu and select Boundary Settings.

Boundary Mode
Select domain 2
Select ci=clo.
Set boundaries 1,3,4,6 with InsulatiodSymmetry
0
Set boundaries 7,8 with --~1. N = -Kef ( ci - C, )

Set boundary 5 with convective flux BC
Apply/OK

Pull down the Multiphysics menu and Select Add/Edit modes.

Model Navigator
0 Select add geometry name: geom2
Check l-D dimension
0 Select PDE coefficient form (cl)
Name the independent variable cs
Element: Lagrange - quadratic
More >>
OK

Pull down the Draw menu and select Specify Geometry.

Draw Mode
Name: cell
0
Start:O
stop: 1
APPlY
OK
0
Pull down the Boundary menu and select Boundary Settings.

Boundary Mode
0 Select domain 1&2
Specify Neumann BCs with q=g=O
OK
Pull down the Now pull down the Subdomain menu and select Subdomain
settings.