Page 620 - Rock Mechanics For Underground Mining

REFERENCES

Kaiser, P. K. and Tannant, D. D. (2001) The role of shotcrete in hard-rock mines. Underground Mining
Methods: Engineering Fundamentals and International Case Studies (eds W. A. Hustrulid and R. L.
Bullock), 579–92. Society for Mining, Metallurgy and Exploration: Littleton, Colorado.
Kaiser, P. K., Tannant, D. D. and McCreath, D. G. (1996) Canadian Rock Burst Support Handbook.
Geomechanics Research Center: Sudbury.
Kamewada, S., Gi, H. S., Tanagucki, S. and Yoneda, H. (1990) Application of borehole image processing
system to survey of tunnel. Proc. Int. Symp. Rock Joints, Leon (eds N. Barton and O. Stephansson),
277–84. A. A. Balkema: Rotterdam.
Karzulovic, A., Cavieres, P. and Pardo, C. (1999) Caving subsidence at El Teniente Mine (in Spanish).
Proc. Symp. Min. Engng, SIMIN 99, Dept. Min. Engng, Univ. Santiago, Santiago.
Kelly, M., Gale, W., Hatherly, P., Balusu, R. and Luo, X. (1996) New understanding of longwall caving
processes: results of microseismic monitoring and initial computational modelling at Gordonstone mine.
Proc.Symp.GeologyinLongwallMining,Sydney(edsG.H.McNallyandC.R.Ward),153–61.Coalfield
Geology Council of New South Wales: Sydney.
Kelly, M., Gale, W., Luo, X., Hatherly, P., Balusu, R. and LeBlanc Smith, G. (1998) Longwall caving
process in different geological environments – better understanding through the combination of modern
assessment methods. Proc. Int. Conf. Geomech./Ground Control in Mining and Construction, Wollon-
gong (eds N. I. Aziz and B. Indraratna), 1: 573–89. Univ. Wollongong: Wollongong.
Kelly, M., Luo, X. and Craig, S. (2002) Integrating tools for longwall geomechanics. Int. J. Rock Mech.
Min. Sci., 39(5): 661–76.
Kendorski, F. S. (1978) The cavability of ore deposits. Min. Engng, 30(6): 628–31.
Kendrick, R. (1970) Induction caving of the Urad mine. Min. Congr. J., 56(10): 39–44.
King, H. J., Whittaker, B. N. and Shadbolt, C. H. (1975) Effects of mining subsidence on surface structures.
Mining and the Environment (ed. M. J. Jones), 617–42. Instn Min. Metall.: London.
Kirsch, G. (1898) Die theorie der elastizitat und die bed¨urfnisse der festigkeitslehre. Veit. Ver. Deut. Ing.,
42: 797–807.
Knutsson, S. (1981) Stresses in hydraulic backfill from analytical calculations and in-situ measurement.
Applications of Rock Mechanics to Cut and Fill Mining (eds O. Stephansson and M. J. Jones), 261–8.
Instn Min. Metall.: London.
Kolsky, H. (1963) Stress Waves in Solids. Dover: New York.
Korf, C. W. (1978–9) Stick and pillar support on Union Section, Rustenburg Platinum Mines Ltd. Assn
Mine Managers S. Afr., Papers and Discns, 71–6.
Koskela, V. A. (1983) Consolidated backfilling at Outokumpu Oy’s Vihanti, Keretti and Vammala
mines. Proc. Int. Symp. on Mining with Backfill, Lule˚a (ed. S. Granholm), 151–9. A. A. Balkema:
Rotterdam.
Kovari, K., Amsted, C. and Grob, H. (1974) Displacement measurements of high accuracy in underground
openings. Advances in Rock Mechanics, Proc. 3rd Congr., Int. Soc. Rock Mech., Denver, 2A: 445–50.
Nat. Acad. Sci.: Washington, DC.
Kuszmal, J. S. (1999) Estimating keyblock sizes in underground excavations: accounting for joint spacing.
Int. J. Rock Mech. Min. Sci., 36(2): 217–32.
Kutter, H. K. and Fairhurst, C. (1968) The roles of stress waves and gas pressure in presplitting. Status of
Practical Rock Mechanics, Proc. 9th U. S. Symp. Rock Mech., Golden (eds N. E. Grosvenor and B. W.
Paulding), 265–84. AIME: New York.
Kutter, H. K. and Fairhurst, C. (1971) On the fracture process in blasting. Int. J. Rock Mech. Min. Sci.,
8(3): 181–202.
Kvapil, R. (1965) Gravity flow of granular material in hoppers and bins. Int. J. Rock Mech. Min. Sci. 2(1):
35–41; 2(3): 277–304.
Kvapil, R. (1992) Sublevel caving. SME Mining Engineering Handbook, 2nd edn (ed. H. L. Hartman), 2:
1789–1814. Soc. Min. Engrs, AIME: New York.
Labreche, D. A. (1983) Damage mechanisms in tunnels subjected to explosive loads. Seismic Design of
Embankments and Caverns, 128–41. ASCE: New York.
Labuc, V., Bawden, W. and Kitzinger, F. (1987) Seismic monitoring system using fiber-optic signal trans-
mission. Proc. 6th Congr., Int. Soc. Rock Mech., Montreal (eds G. Herget and S. Vongpaisal), 2: 1051–5.
A. A. Balkema: Rotterdam.
Lacasse, M. and Legast, P. (1981) Change from grizzly to LHD extraction system. Design and Operation
of Caving and Sublevel Stoping Mines (ed. D. R. Stewart), 107–18. Soc. Min. Engrs, AIME: New
York.

602