Page 625 - Rock Mechanics For Underground Mining

REFERENCES

Priest, S. D. (1985) Hemispherical Projection Method in Rock Mechanics. Allen & Unwin: London.
Priest, S. D (1993) Discontinuity Analysis for Rock Engineering. Chapman & Hall: London.
Priest, S. D. and Hudson, J. A. (1976) Discontinuity spacings in rock. Int. J. Rock Mech. Min. Sci. &
Geomech. Abstr., 13(5): 135–48.
Priest, S. D. and Hudson, J. A. (1981) Estimation of discontinuity spacing and trace length using scanline
surveys. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 18(3): 183–97.
Proctor, R. J. and White, T. L. (1977) Rock Tunnelling with Steel Supports, rev. edn. Commercial Shearing
and Stamping Co.: Youngstown, Ohio.
Quinteiro, C. R., Larsson, L. and Hustrulid, W. A. (2001) Theory and practice of very-large-scale sublevel
caving. Underground Mining Methods: Engineering Fundamentals and International Case Studies (eds
W. A. Hustrulid and R. L. Bullock), 381–84. Society for Mining, Metallurgy and Exploration: Littleton,
Colorado.
Rachmad, L. and Sulaeman, A. (2002) Cave management practice at PT Freeport Indonesia’s block caving
mines. Mining and Tunnelling Innovation and Opportunity, Proc. 5th North Am. Rock Mech. Symp. &
17th Tunn. Assn Can. Conf., Toronto (eds R. Hammah, W. Bawden, J. Curran and M. Telesnicki), 1:
189–93. Univ. Toronto Press: Toronto.
Rachmad, L. and Widijanto, E. (2002) Application of convergence monitoring at PT Freeport Indonesia’s
deep ore zone mine. Mining and Tunnelling Innovation and Opportunity, Proc. 5th North Am. Rock
Mech. Symp. & 17th Tunn. Assn Can. Conf., Toronto (eds R. Hammah, W. Bawden, J. Curran and
M. Telesnicki), 1: 181–88. Univ. Toronto Press: Toronto.
Rachmad, L., Widijanto, E. and Sinaga, F. (2002) An empirical review of extraction bolting design in Deep
Ore Zone Mine PT Freeport Indonesia. Growing Our Underground Operations, Proc. 8th AusIMM
Underground Operators’ Conf., Townsville, 249–54. Aust. Inst. Min. Metall.: Melbourne.
Ran, J. J., Seldon, S. C. and Counter, D. B. (2002) Undergound mining induced remobilization of a
hangingwall wedge and movement of footwall structures at Kidd Mine – a case study. Mining and
Tunnelling Innovation and Opportunity, Proc. 5th North Am. Rock Mech. Symp. & 17th Tunn. Assn Can.
Conf., Toronto (eds R. Hammah, W. Bawden, J. Curran and M. Telesnicki), 1: 297–304. Univ. Toronto
Press: Toronto.
Reinecker, J., Heidbach, O. and Mueller, B. (2003) The 2003 release of the World Stress Map. (Available
online at www.world-stress-map.org).
Rice, G. S. (1934) Ground movement from mining in Brier Hill Mine, Norway, Mich. Trans Am. Inst. Min.
Metall. Engrs, 109: 118–44.
Richardson, A. M., Brown, S. M., Hustrulid, W. A. and Richardson, D. L. (1986) An interpretation of
highly scattered stress measurements in foliated gneiss. Proc. Int. Symp. on Rock Stress and Rock Stress
Measurement, Stockholm (ed. O. Stephansson), 441–8. Centek: Lule˚a.
Richardson, M. P. (1981) Area of draw influence and drawpoint spacing for block caving mines. Design
and Operation of Caving and Sublevel Stoping Mines (ed. D. R. Stewart), 149–56. Soc. Min. Engrs:
AIME, New York.
Richter, C. F. (1935) An instrumental earthquake magnitude scale. Bull. Seism. Soc. Am., 25: 1–32.
Roberts, A. (1977) Geotechnology. Pergamon: Oxford.
Roberts, D. P., Lane, W. L. and Yanske, T. R. (1998) Pillar extraction at the Doe Run Company. Minefill
’98, Proc. 6th Int. Symp. Mining with Backfill, Brisbane (ed. M. Bloss), 227–33. Aus. Inst. Min. Metall.:
Melbourne.
Roberts, M. K. C. and Brummer, R. K. (1988) Support requirements in rockburst conditions. J. S. Afr. Inst.
Min. Metall., 88(3): 97–104.
Robinson, L. H. (1959) The effect of pore and confining pressure on the failure process in sedimentary
rock. Q. Colo. School Mines, 54(3): 177–99.
Rocscience (1999) DIPS – Data Interpretation Package Using Stereographic Projection Software. Roc-
science Inc.: Toronto.
Roegiers, J-C. (1989) Elements of rock mechanics. Reservoir Stimulation (M. J. Economides and K. G.
Nolte), 2.1–2.21. Prentice-Hall: Englewood Cliffs, New Jersey.
Rojas, E., Cavieres, P., Dunlop, R. and Gaete, S. (2000) Control of induced seismicity at El Teniente Mine,
Codelco-Chile. Proc. MassMin 2000, Brisbane (ed. G. Chitombo), 755–84. Aust. Inst. Min. Metall.:
Melbourne.
Rojas, E., Molina, R., Bonani, A. and Constanzo, H. (2000) The pre-undercut caving method at the El
Teniente Mine, Codelco Chile. Proc. MassMin 2000, Brisbane (ed. G. Chitombo), 261–66. Aust. Inst.
Min. Metall.: Melbourne.

607