Page 629 - Rock Mechanics For Underground Mining

REFERENCES

Thomas, L. J. (1978) An Introduction to Mining, rev. edn. Methuen: Sydney.
Thompson, A. G. and Finn, D. J. (1999) The performance of grouted split tube rock bolt systems.
Rock Support and Reinforcement Practice in Mining, Proc. Int. Symp. Rock Support, Kalgoorlie (eds
E. Villaescusa, C. R. Windsor and A. G. Thompson), 91–102. A. A. Balkema: Rotterdam.
Thompson, A. G., Matthews, S. M., Windsor, C. R., Bywater, S. and Tillmann, V. H. (1987) Innovations in
rock reinforcement in the Australian mining industry. Proc. 6th Congr., Int. Soc. Rock Mech., Montreal
(eds G. Herget and S. Vongpaisal), 2: 1275–8. A. A. Balkema: Rotterdam.
Thompson, J. M. and Hunt, G. W. (1973) A General Theory of Elastic Stability. Wiley: London.
Thompson, P. W., MacGregor, S. and Dight, P. (1993) Instrumentation monitoring at an underground mine
to establish failure mechanisms, confirm numerical modelling and determine safe working conditions.
Geotechnical Instrumentation and Monitoring in Open Pit and Underground Mining, Proc. Aust. Conf.
Geotechnical Instrumentation and Monitoring in Open Pit and Underground Mining, Kalgoorlie (ed.
T. Szwedzicki), 501–11. A. A. Balkema: Rotterdam.
Timoshenko, S. P. and Goodier, J. N. (1970) Theory of Elasticity, 3rd edn. Wiley: New York.
Toper, A. Grodner, M., Stewart, R. and Lightfoot, N. (1997) Preconditioning: a rockburst control technique.
Rockbursts and Seismicity in Mines, Proc. 4th Int. Symp., Krakow (eds S. J. Gibowicz and S. Lasocki),
267–72. A. A. Balkema: Rotterdam.
Townsend, P. (1988) Personal communication.
Trifu, C. I., Shumila, V. and Burgio, N. (2002) Characterization of the caving front at Ridgeway Mine,
New South Wales, based on geomechanical data and detailed microseismic analysis. Proc. Int. Seminar
on Deep and High Stress Mining, Perth, Section 41: 1–15. Aust. Centre for Geomech.: Perth.
Trout, P. (2002) Production drill and blast practices at Ridgeway Gold Mine. Growing Our Underground
Operations, Proc. 8th AusIMM Underground Operators’ Conf., Townsville, 107–17. Aust. Inst. Min.
Metall.: Melbourne.
Trueman, R., Mikula, P., Mawdesley, C. and Harries, N. (2000) Experience in Australia with the application
of the Mathews method of open stope design. CIM Bull., 93(1036): 162–67.
Tucker, L. J. (1981) Sublevel caving at Pea Ridge. Design and Operation of Caving and Sublevel Stoping
Mines (ed. D. R. Stewart), 387–91. Soc. Min. Engrs, AIME: New York.
Urbancic, T. I. and Young, R. P. (1993) Space-time variations in source parameters of mining-induced
seismic events withM<0events. Bull. Seism. Soc. Am., 83: 378–97.
van As, A. and Jeffrey, R. G. (2000) Hydraulic fracturing as a cave inducement technique at Northparkes
Mines. Proc. MassMin 2000, Brisbane (ed. G. Chitombo), 165–72. Aust. Inst. Min. Metall.: Melbourne.
Van Sint Jan, M. L., Valenzuela, L. and Morales, R. (1987) Flexible underground openings in a block
caving mine. Proc. 6th Congr., Int. Soc. Rock Mech., Montreal (eds G. Herget and S. Vongpaisal), 2:
1299–1303. A. A. Balkema: Rotterdam.
van Heerden, W. L. (1975) In-situ complete stress-strain characteristics of large coal specimens. J. S. Afr.
Inst. Min. Metall., 75(8): 207– 17.
Vardoulakis, I. (1979) Bifurcation analysis of the triaxial test on sand samples. Acta Mechanica, 32: 35–54.
Vardoulakis, I., Sulem, J. and Guenot, A. (1988) Borehole instabilities as deformation phenomena. Int. J
Rock Mech. Min. Sci. & Geomech. Abstr., 25(3): 159–70.
Vieira, F. M. C. C., Diering, D. H. and Durrheim, R. J. (2001) Methods to mine the ultra-deep tabular gold-
bearing reefs of the Witwatersrand Basin, South Africa. Underground Mining Methods: Engineering
Fundamentals and International Case Studies (eds W. A. Hustrulid and R. L. Bullock), 691–704. Society
for Mining, Metallurgy and Exploration: Littleton, Colorado.
Villaescusa, E. C. (1991) A Three Dimensional Model of Rock Jointing. PhD thesis, University of Queens-
land, Brisbane.
Villaescusa, E. (1996) Excavation design for bench stoping at Mount Isa mine, Queensland, Australia.
Trans. Instn Min. Metall., 105: A1–10.
Villaescusa, E. (1999) An Australian perspective to grouting for cablebolt reinforcement. Rock Support
and Reinforcement Practice in Mining, Proc. Int. Symp. Rock Support, Kalgoorlie (eds E. Villaescusa,
C. R. Windsor and A. G. Thompson), 91–102. A. A. Balkema: Rotterdam.
Villaescusa, E. and Brown, E. T. (1992) Maximum likelihood estimation of joint size from trace length
measurements. Rock Mech. Rock Engng, 25: 67–87.
Villaescusa, E. and Kuganathan, K. (1998) Backfill for bench stoping operations. Minefill ’98, Proc. 6th
Int. Symp. Mining with Backfill, Brisbane (ed. M. Bloss), 179–84. Aust. Inst. Min. Metall.: Melbourne.
Villaescusa, E., Seto, M. and Baird, G. (2002) Stress measurements from oriented core. Int. J. Rock Mech.
Min. Sci., 39(5): 603–15.

611