Page 621 - Rock Mechanics For Underground Mining

REFERENCES

Ladanyi, B. (1974) Use of the long-term strength concept in the determination of ground pressure on tunnel
linings. Advances in Rock Mechanics, Proc. 3rd Congr., Int. Soc. Rock Mech., Denver, 2A: 1150–6. Nat.
Acad. Sci.: Washington, DC.
Ladanyi, B. and Archambault, G. (1977) Shear strength and deformability of filled indented joints. Proc. Int.
Symp. Geotechnics of Structurally Complex Formations, Capri, 1: 317–26. Associazione Geotechnica
Italiana.
Lamb, H. (1956) Infinitesimal Calculus. Cambridge University Press: Cambridge.
Landriault, D. (2001) Backfill in underground mining. Underground Mining Methods: Engineering Fun-
damentals and International Case Studies (eds W. A. Hustrulid and R. L. Bullock), 601–14. Society for
Mining, Metallurgy and Exploration: Littleton, Colorado.
Lane, W. L., Yanske, T. R., Clark, L. M. and Roberts, D. P. (2001) Pillar extraction and rock mechanics at the
DoeRunCompanyinMissouri1991to2000.UndergroundMiningMethods:EngineeringFundamentals
and International Case Studies (eds W. A. Hustrulid and R. L. Bullock), 95–101. Society for Mining,
Metallurgy and Exploration: Littleton, Colorado.
Lang, T. A. (1961) Theory and practice of rock bolting. Trans Soc. Min. Engrs, AIME, 220: 333–48.
Lang, T. A. and Bischoff, J. A. (1982) Stabilization of rock excavations using rock reinforcement. Issues
in Rock Mechanics, Proc. 23rd U. S. Symp. Rock Mech., Berkeley (eds R. E. Goodman and F. E. Heuze),
935–43. AIME: New York.
Lappalainen, P. and Antikainen, J. (1987) Mechanized cable bolting in stoping and tunnelling at the
Pyh¨asalmi Mine. Improvement of Mine Productivity and Overall Economy by Modern Technology,
793–96. A. A. Balkema: Rotterdam.
Laubscher, D. H. (1977) Geomechanics classification of jointed rock masses – mining applications. Trans.
Instn Min. Metall., 86: A1–8.
Laubscher, D. H. (1990) A geomechanics classification system for the rating of rock mass in mine design.
J. S. Afr. Inst. Min. Metall., 90(10): 257–73.
Laubscher, D. H. (1994) Cave mining – the state of the art. J. S. Afr. Inst. Min. Metall., 94(10): 279–93.
Laubscher, D. H. and Jakubec, J. (2001) The MRMR rock mass classification for jointed rock masses.
Underground Mining Methods: Engineering Fundamentals and International Case Studies (eds W.
A. Hustrulid and R. L. Bullock), 475–81. Society for Mining, Metallurgy and Exploration: Littleton,
Colorado.
Laubscher, D. H. and Taylor, H. W. (1976) The importance of geomechanics classification of jointed
rock masses in mining operations. Exploration for Rock Engineering (ed. Z. T. Bieniawski), 1: 119–28.
A. A. Balkema: Cape Town.
Lawrence, W. J. C. and Bock, H. F. (1982) Numerical modelling of the yielding 11-level crown pillar at
Mount Isa. Aust. Geomech. News, No. 5: 9–16.
Leach, A. R., Naidoo, K. and Bartlett, P. (2000) Considerations for design of production level drawpoint
layouts for a deep block cave. Proc. MassMin 2000, Brisbane (ed. G. Chitombo), 357–66. Aust. Inst.
Min. Metall.: Melbourne.
Lee, M. F. and Bridges, M.C. (1981) Rock mechanics of crown pillars between cut-and-fill stopes at Mount
Isa Mine. Applications of Rock Mechanics to Cut and Fill Mining (eds O. Stephansson and M. J. Jones),
316–29. Instn Min. Metall.: London.
Lee, M. F., Beer, G. and Windsor, C. R. (1990) Interaction of stopes, stresses and geologic structure
at the Mount Charlotte mine, Western Australia. Rockbursts and Seismicity in Mines, Proc. 2nd Int.
Symp. on Rockbursts and Seismicity in Mines, Minneapolis (ed. C. Fairhurst), 337–43. A. A. Balkema:
Rotterdam.
Leeman, E. R. and Hayes, D. J. (1966) A technique for determining the complete state of stress in rock
using a single borehole. Proc. 1st Congr., Int. Soc. Rock Mech., Lisbon, 2: 17–24.
Li, T., Brown, E. T., Singh, U. and Coxon, J. (2003) Dynamic support rationale and systems. Technology
Roadmap for Rock Mechanics, Proc. 10th Congr., Int. Soc. Rock Mech., Johannesburg, 2: 763–68. S. Afr.
Inst. Min. Metall.: Johannesburg.
Lin, S., Whittaker, B. N. and Reddish, D. J. (1992) Application of asymmetrical influence functions for
subsidence prediction of gently inclined seam extractions. Int. J. Rock Mech. Min. Sci, & Geomech.
Abstr., 29(5): 479–490.
Londe, P. (1982) Concepts and instruments for improved monitoring. J. Geotech. Engng Div., ASCE,
108(GT6): 820–34.
Lorig, L. J. (1985) A simple numerical representation of fully bonded passive reinforcement for hard rocks.
Computers and Geotechnics, 1: 79–97.

603