Page 423 - Sensors and Control Systems in Manufacturing

Industrial Sensors and Contr ol
Finkelstein, L., and R. D. Watts, “Fundamental of Transducers—Description by 377
Mathematical Models,” Handbook of Measurement Science, vol. 2, P. H. Sydenham
(ed.), Wiley, New York, 1983.
Friebele, E. L. and M. E. Gingerich, “Radiation-Induced Optical Absorption Bands
in Low Loss Optical Fiber Waveguides,” J. Non-Crust. Solids, 38(39), 245–250
(1980).
Henze, M., “Fiber Optics Temperature and Vibration Measurements in Hostile
Environments,” Technical Material, ASEA Research and Innovation, CF23-1071E
(1987).
Hofer, B., “Fiber Optic Damage Detection in Composite Structure,” Proc. 15th
Congress. Int. Council Aeronautical Science, ICAS-86-4.1.2, 135–143 (1986).
Kapany, N. S., Fiber Optics, Principles and Applications, Academic Press, London,
1976.
Lagakos, N., et al., “Multimode Optical Fiber Displacement Sensor,” Appl. Opt.,
20, 167 (1981).
Liu, K., “Optical Fiber Displacement Sensor Using a Diode Transceiver,” Fiber Optic
Sensors II, A. M. Sheggi (ed.), Proc. SPIE, 798, 337–341 (1987).
Mizuno, Y., and T. Nagai, “Lighting Observation System on Aerial Power
Transmission Lines by Long Wavelength Optical Transmission,” Applications of
Fiber Optics in Electrical Power Systems in Japan, C.E.R.L. Letterhead, paper 5.
Mori, S., et al., “Development of a Fault-Locating System Using OPGW,” Simitomo
Electric Tech. Rev. (25), 35–47.
Norton, H. N., Sensors and Analyzer Handbook, Prentice-Hall, Englewood Cliffs,
N.J., 1982.
Neubert, H.K.P., Instrument Transducers, 2d ed., Clarendon Press, Oxford, 1975.
Ogeta, K., Modern Control Engineering, 2d ed. Prentice-Hall, Englewood Cliffs, N.J.,
1990.
Petrie, G. R., K. W. Jones, and R. Jones, “Optical Fiber Sensors in Process Control,”
4th Int. Conf. Optical Fiber Sensors, OFS’86, Informal Workshop at Tsukuba
Science City, VIII I–VIII 19, 1986.
Place, J. D., “A Fiber Optic Pressure Transducer Using A Wavelength Modulation
Sensor,” Proc. Conf. Fiber Optics ‘85 (Sira), London, 1985.
Ramakrishnan, S., L. Unger, and R. Kist, “Line Loss Independent Fiberoptic
Displacement Sensor with Electrical Subcarrier Phase Encoding,” 5th Int. Conf.
Optical Fiber Sensors, OFS ‘88, New Orleans, 133–136, 1988.
Sandborn, V. A., Resistance Temperature Transducers, Metrology Press, Fort Collins,
Colo., 1972.
Scruby, C. B., R. J. Dewhurst, D. A. Hutchins, and S. B. Palmer, “Laser Generation
of Ultrasound in Metals,” Research Techniques in Nondestructive Testing, vol. 15,
R. S. Sharpe (ed.), Academic Press, London, 1982.
Tsumanuma, T., et al., “Picture Image Transmission-System by Fiberscope,” Fujikura
Technical Review (15), 1–10 (1986).
Vogel, J. A., and A. J. A. Bruinsma, “Contactless Ultrasonic Inspection with Fiber
Optics,” Conf. Proc. 4th European Conf. Non-Destructive Testing, Pergamon Press,
London, 1987.
Yasahura, T., and W. J. Duncan, “An Intelligent Field Instrumentation System
Employing Fiber Optic Transmission,” Advances in Instrumentation, ISA, Wiley,
London, 1985.
Cova, S. et al., “ Avalanche Photodiodes for Near Infrared Photon-Counting,” SPIE
Proc., vol. 2388 (1995).
Dautet, H., et al., “Photon-Counting Techniques with Silicon Avalanche
Photodiodes,” Applied Optics, 32 (21), 3894–3900 (1993).
Mclntyre, R. J., “Multiplication Noise in Uniform Avalanche Diodes,” IEEE Trans.
Electron Devices, ED13, 164–168 (1966).
Product Datasheet ED-0017/03/88: C30902 - 921 E/S, EG&G Canada Ltd.