Page 371 - The Engineering Guide to LEED-New Construction Sustainable Construction for Engineers
P. 371
332 Cha pte r Ei g h t
Prerequisite or Credit Referenced Standards/Codes, etc.
IEQc2: Increased Ventilation For mechanically ventilated areas:
• ASHRAE Standard 62.1-2007 with errata
For naturally ventilated areas:
• Carbon Trust Good Practice Guide 237 (1998)
and
• Chartered Institution of Building Services
Engineers (CIBSE) Applications Manual 10:
2005, natural ventilation in nondomestic
buildings, effective as per Fig. 1.18
And model by either
• Chartered Institution of Building Services
Engineers (CIBSE) Applications Manual 10:
2005, natural ventilation in nondomestic
buildings or CIBSE Applications Manual
13:2000, Mixed Mode Ventilation (as applicable)
Or
• ASHRAE 62.1-2007, Chapter 6, for at least
90% of occupied spaces
IEQc3.1: Construction IAQ Management • Sheet Metal and Air Conditioning National
Plan, During Construction Contractors Association (SMACNA) IAQ
Guidelines for Occupied Buildings under
-Construction, 2007, Chapter 3
ASHRAE 52.2-1999 for MERV ratings
IEQc3.2: Construction IAQ Management Option 2:
Plan, Before Occupancy EPA Compendium of Methods for the
Determination of Air Pollutants in Indoor Air
IEQc4.1: Low-Emitting Materials: Adhesives Adhesives, sealants, and Sealant Primers:
and Sealants • South Coast Air Quality Management District
(SCAQMD) Rule #1168, through 01/07/2005
Aerosol adhesives:
• Green Seal Standard for Commercial
Adhesives GS-36 requirements 10/19/2000
IEQc4.2: Low-Emitting Materials: Paints and Architectural paints, coatings, and primers
Coatings applied to interior walls and ceilings:
-VOC content limits in Green Seal Standard
GS-11, Paints, 1st ed., May 20, 1993.
• Anti-corrosive and antirust paints applied to
interior ferrous metal substrates:
• VOC content limit of 250 g/L established in
Green Seal Standard GC-03, Anti-Corrosive
Paints, 2d ed., January 7, 1997.
• Clear wood finishes, floor coatings, stains,
and shellacs applied to interior elements:
• VOC content limits established in South Coast
Air Quality Management District (SCAQMD)
Rule 1113, Architectural Coatings 10/1/2004
TABLE 8.2.1 Listing of Referenced Standards—LEED 2009 (Continued)
