Page 373 - Thermal Hydraulics Aspects of Liquid Metal Cooled Nuclear Reactors

336 Thermal Hydraulics Aspects of Liquid Metal Cooled Nuclear Reactors

Chun, M., Seo, K., 2001. An experimental study and assessment of existing friction factor cor-
relations for wire-wrapped fuel assemblies. Ann. Nucl. Energy 28, 1683–1695.
Collingham, R., Hill, V., Yatabe, J., Thorne, W., 1970. Developments and results of an electri-
cally heated seven-pin bundle assembly for thermal hydraulic testing in liquid metals.
BNWL-SA-3286, Batelle North-West Labatories, USA.
Degroote, J., 2013. Partitioned simulation of fluid-structure interaction. Arch. Comput.
Methods Eng. 20, 185–238.
Di Piazza, I., Magugliani, F., Tarantino, M., Alemberti, A., 2014. A CFD analysis of flow block-
age phenomena in ALFRED LFR demo fuelassembly. Nucl. Eng. Des. 276, 202–215.
Di Piazza, I., Angelucci, M., Marinari, R., Tarantino, M., 2016. Heat transfer on HLM cooled
wire-spaced fuel pin bundle simulatorin the NACIE-UP facility. Nucl. Eng. Des. 300,
256–267.
Doda, N., Ohshima, H., Kamide, H., Watanabe, O., Ohkubo, Y., 2010. Effects of wire spacer
contact and pellet-cladding eccentricity on fuel cladding temperature under natural circu-
lation decay heat removal conditions in sodium-cooled fast reactor. In: NUTHOS-8,
Shanghai, China.
Doolaard, H., Gopala, V.R., Bijleveld, H., Roelofs, F., 2014. Influence of blockages in wire-
wrapped rod bundles. In: SEARCH/MAXSIMA International Workshop, Karlsruhe,
Germany.
Doolaard, H., Shams, A., Roelofs, F., Van Tichelen, K., Keijers, S., De Ridder, J., Degrootte, J.,
Vierendeels, J., Di Piazza, I., Marinari, R., Merzari, E., Obabko, A., Fischer, P., 2015. CFD
benchmark for a heavy liquid metal fuel assembly. In: NURETH16, Chicago, USA.
pp. 2196–2208.
Doolaard, H., Roelofs, F., Pacio, J., Batta, A., 2017. Experiment design to assess the inter-
wrapper heat transfer in LMFR. In: NURETH17, Xi’an, China (to be published).
Engel, F., Minushkin, B., Atkins, R., Markley, R., 1980. Characterization of heat transfer and
temperature distribution in an electrically heated model of an LMFBR blanket assembly.
Nucl. Eng. Des. 62, 335–347.
Fenech, H., 1985. Local heat transfer and hot-spot factors in wire-wrap tube bundle. Nucl. Eng.
Des. 88, 357–365.
Fischer, P., Lottes, J., Siegel, A., Palmiotti, G., 2007. Large eddy simulation of wire-wrapped
fuel pins I: hydrodynamics of a single pin. In: M and C + SNA 2007, Monterey, USA.
Fomichev, D., Solonin, V., 2014. A CFD analysis of hydraulic characteristics of the rod bundles
in the BREST-OD-300 wire-spaced fuel assemblies. Int. Sci. Index, 8 (7) (Part XII).
Fontana, M., 1973. Temperature distribution in the duct wall and at the exit of a 19-rod simu-
lated LMFBR fuel assembly (FFM-2A). ORNL-4852, Oak Ridge National Laboratory,
USA.
Fricano, J., Baglietto, E., 2014. A quantitative CFD benchmark for sodium fast reactor fuel
assembly modeling. Ann. Nucl. Energy 64, 32–42.
Gajapathy, R., Velusamy, K., Selvaraj, P., Chellapandi, P., Chetal, S., 2009. A comparative
CFD investigation of helical wire-wrapped 7, 19, and 37 fuel pin bundles and its extend-
ability to 217 pin bundle. Nucl. Eng. Des. 239, 2279–2292.
Ghovindha Rasu, N., Velusamy, K., Sundararajan, T., Chellapandi, P., 2014. Simultaneous
development of flow and temperature fields inwire-wrapped fuel pin bundles of sodium
cooled fast reactor. Nucl. Eng. Des. 267, 44–60.
Gopala, V.R., Doolaard, H., Sanna, V., Roelofs, F., 2014. Detailed investigation of flow through
wire-wrapped fuel assemblies using computational fluid dynamics. In: THINS 2014 Inter-
national Workshop, Modena, Italy.