Page 374 - Thermal Hydraulics Aspects of Liquid Metal Cooled Nuclear Reactors

Core thermal hydraulics 337

Goth, N., Jones, P., Nguyen, D., Vaghetto, R., Hassan, Y., Obabko, A., Merzari, E., Fischer, P.,
2017. Comparison of experimental and simulation results on interior subchannel of a
61-pin wire-wrapped hexagonal fuel bundle. In: NURETH-17, Xi’an, China.
IAEA, 2012. Status of Fast Reactor Research and Technology Development. Technical Report
474, ISBN 978-92-0-130610-4, Vienna, Austria.
Jeong, J.-H., Song, M.-S., Lee, K.-L., 2017a. RANS based CFD methodology for a real
scale 217-pin wire-wrapped fuel assembly of KAERI PGSFR. Nucl. Eng. Des.
313, 470–485.
Jeong, J.-H., Song, M.-S., Lee, K.-L., 2017b. CFD investigation of three-dimensional flow phe-
nomena in a JAEA 127-pin wire-wrapped fuel assembly. Nucl. Eng. Des. 323, 166–184.
Kamide, H., Hayashi, K., Toda, S., 1998. An experimental study of inter-subassembly heat
transfer during natural circulation decay heat removal in fast breeder reactors. Nucl.
Eng. Des. 183, 97–106.
Kamide, H., Hayashi, K., Isozaki, T., Nishimura, M., 2001. Investigation of core
thermohydraulics in fast reactors – interwrapper flow during natural circulation. Nucl.
Technol. 133, 77–91.
Katsuyama, K., Nagamine, T., Matsumoto, S., Ito, M., 2003. Application of X-ray computer
tomography for observing the deflection and displacement of fuel pins in an assembly irra-
diated in FBR. J. Nucl. Sci. Technol. 40, 220–226.
Kennedy, G., Van Tichelen, K., Doolaard, H., 2015. Experimental investigation of the pressure
loss characteristics of the full-scale MYRRHA fuel bundle in the COMPLOT LBE facility.
In: NURETH16, Chicago, USA.
Kim, H., Bae, H., Ko, Y.J., Choi, S.R., Chang, S.-K., Lee, D.-W., Choi, H.S., Euh, D.-J.,
Lee, H.-Y., 2016. Investigations of single-phase flow mixing characteristics in a wire-
wrapped 37-pin bundle for a sodium-cooled fast reactor. Ann. Nucl. Energy 87, 541–546.
Lorenz, J., Ginsberg, T., 1977. Coolant mixing and subchannel velocities in an LMFBR fuel
assembly. Nucl. Eng. Des. 40, 315–326.
Lyu, K., Chen, L., Yue, C., Gao, S., Zhou, T., Huang, Q., 2016. Preliminary thermal-hydraulic
sub-channel analysis of 61 wire-wrapped bundle cooled by lead bismuth eutectic. Ann.
Nucl. Energy 92, 243–250.
Marinari, R., Di Piazza, I., Tarantino, M., Magugliani, F., Alemberti, A., Borreani, W.,
Ghionzoli, B., 2016. CFD pre-test analysis and design of the NACIE-UP BFPS fuel pin
bundle simulator. In: ICONE-24, Charlotte, USA.
Marinari, R., Di Piazza, I., Forgione, N., Magugliani, F., 2017. Pre-test CFD simulations of the
NACIE-UP BFPS test section. Ann. Nucl. Energy 110, 1060–1072.
Marino, A., 2015. Numerical Modeling of Oxygen Mass Transfer in the MYRRHA System.
PhD thesis, University Press. ISBN 978-9-4619730-5-4.
Marino, A., Lim, J., Keijers, S., Van den Bosch, J., Deconinck, J., Rubio, F., Woloshun, K.,
Caro, M., Maloy, S.A., 2014. Temperature dependence of dissolution rate of a lead oxide
mass exchanger in lead-bismuth eutectic. J. Nucl. Mater. 450, 270–277.
Marino, A., Lim, J., Keijers, S., Vanmaercke, S., Aerts, A., Rosseel, K., Deconinck, J., Van den
Bosch, J., 2015. A mass transfer correlation for packed bed of lead oxide spheres in flowing
lead-bismuth eutectic. Int. J. Heat Mass Transf. 80, 737–747.
Marino, A., Lim, J., Keijers, S., Deconinck, J., Aerts, A., 2017. Numerical modeling of oxygen
mass transfer in a wire wrapped fuel assembly under flowing lead bismuth eutectic. J. Nucl.
Mater. https://doi.org/10.1016/j.jnucmat.2017.12.017.
McCreery, G., McIllroy, H., Hamman, K., Zhang, H., 2008. Design of wire-wrapped rod bundle
matched index-of-refraction experiments. In: ICONE16, Orlando, USA.