Page 445 - Trenchless Technology Piping Installation and Inspection

APPENDIX A

References

American Concrete Pipe Association (2000). “Concrete Pipe Design Manual,”
ACPA, Irving, Tex.
American National Standards Institute (2006). “National Electrical Safety Code,”
IEEE, New York.
American National Standards Institute and American Water Works Association.
(2000). “AWWA Standard for Cement-Mortar Lining of Water Pipelines in
Place–4 in. (100 mm) and larger,” Denver, Colo.
American National Standards Institute and American Water Works Association.
(2005). “Disinfecting Water Mains,” AWWA, Denver, Colo.
American National Standards Institute and American Water Works Association.
(2008). “AWWA Standard for Polyurethane Coatings for the Interior and
Exterior of Steel Water Pipe and Fittings,” AWWA, Denver, Colo.
American Society for Testing and Materials (2009). “Standard Practice for
Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing
of a Resin-Impregnated Tube,” ASTM, F1216–09, West Conshohocken, Pa.
American Society for Testing and Materials (2008). “Standard Test Method for
Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils,” ASTM,
D1586-08a, West Conshohocken, Pa.
American Society for Testing and Materials (2006). “Standard Practice for
Classification of Soils for Engineering Purposes (Unified Soil Classification
System),” ASTM, D2487-06, West Conshohocken, Pa.
American Society for Testing and Materials (2005). “Standard Guide for Use of
Maxi Horizontal Directional Drilling for Placement of Polyethylene Pipe or
Conduit Under Obstacles, Including River Crossings,” ASTM, F 1962–05, West
Conshohocken, Pa.
American Society for Testing and Materials (1989). “Standard Practice for
Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-
Flow Applications,” ASTM, D2321–89, West Conshohocken, Pa.
American Society of Civil Engineers (2009). “Inspecting Pipeline Installation,”
ASCE Manuals and Reports on Engineering Practice No. 117, Reston, Va.
American Society of Civil Engineers (2005). “Pipeline Design for Installation by
Horizontal Directional Drilling,” ASCE Manuals and Reports on Engineering
Practice No. 108, Reston, Va.
American Society of Civil Engineers (2004). “Horizontal Auger Boring Projects,”
ASCE Manuals and Reports on Engineering Practice No. 106, Reston, Va.
American Society of Civil Engineers (2003). “Standard Guidelines for the Collection
and Depiction of Existing Subsurface Utility Data,” CI/ASCE Standard 38-02,
Reston, Va.
American Society of Civil Engineers (2001). “Standard Construction Guidelines for
Microtunneling,” CI/ASCE Standard 36-01, Reston, Va.
American Water Works Association (2006). “Infrastructure Reliability: Service Life
Analysis of Water Main Epoxy Lining,” AWWA, Denver, Colo.
American Water Works Association (2002). “Decision Support System for
Distribution System Piping Renewal,” AWWA, Denver, Colo.
American Water Works Association (2001). “Manual of Water Supply Practices M28:
Renewal of Water Mains,” AWWA, Denver, Colo.

395