Page 446 - Trenchless Technology Piping Installation and Inspection
P. 446

396     App endix  A

          Ariaratnam, S. T.,  Harrison, S., and Milligan, J. (2010). “ On-Grade Installation of
             Sanitary Sewers In Baton Rouge, Louisiana Using s Unique Trenchless Vacuum
             Boring System,” Proceedings of No-Dig 2010, May 2–5, 2010, Chicago, Il, North
             American Society of Trenchless Technology, Liverpool, NY.
          Atalah, A. (1998). “The Effect of Pipe Bursting on Nearby Utilities, Pavement,
             and Structures,” Technical Report TTC-98-01, Trenchless Technology Center,
             Louisiana Tech University, Ruston, La.
          Atalah, A. (2004). “Ground Movement in Hard Rock Conditions Related to Pipe
             Bursting,” ASCE Pipeline Specialty Conference, San Diego, Calif., August 2004.
          Atalah, A. (2004). “The Ground Vibration Associated with Pipe Bursting in Rock
             Conditions,” North American NO-DIG 04, Annual Conference of the North
             American Society of Trenchless Technology, New Orleans, La., March 2004.
          Atalah, A. (2004). “The Ground Movement Associated with Large Diameter Pipe
             Bursting in Rock Conditions and Its Impact on Nearby Utilities and Structures,”
             Bowling Green State University, Bowling Green, Ohio.
          Atalah, A. (2006). “The Safe Distance between Large-Diameter Rock Pipe Bursting
             and Nearby Buildings and Buried Structures,” ASCE Journal of Transportation
             Engineering, Vol. 132, April 2006.
          Atalah, A., Iseley, T., and Bennett, D. (1994). “Estimating the Required Jacking
             Force,” NO-DIG 94, Annual Conference of the North American Society of
             Trenchless Technology, Dallas, Tex.
          ATTERIS. Atteris Horizontal Directional Drilling. 2006. http://atteris.com.au/
             capabilities/hdd/. Accessed May 11, 2008.
          Australian Society of Trenchless Technology (2004). “On-line Replacement,” ISTT-
             ASTT, http://www.astt.com.au/On-line.pdf, pp. 1–5. Accessed September 12,
             2009.
          Bennett, R. D., Ariaratnam, S., and Khan, S. (2005). “Pipe Bursting Good Practices,”
             North American Society for Trenchless Technology, Arlington, Va.
          Bonds, R. W., Barnard, L. M., Horton, A. M., and Oliver, G. L. (2004). “Corrosion and
             Corrosion Control Research of Iron Pipe,” Proceedings of ASCE International
             Conference on Pipeline Engineering and Construction, San Diego, Calif.
          Boot, J., Woods, G., and Streatfield, R. (1987). “On–line Replacement of Sewer
             Using Vitrified Clayware Pipes,” Proceedings of No-Dig International ’87,
             ISTT, UK.
          Bureau of Labor Statistics (2007). “National Census of Fatal Occupational Injuries
             in 2006,” U.S. Department of Labor, Washington, D.C.
          Clarke, N. W. (1968). “Buried Pipelines:  A Manual of Structural Design and
             Installation,” Maclaren and Sons Ltd., London.
          Deb, A. K., Snyder, J. K., Chelius, J. J., and O’Day, D. K. (1990). “Assessment of
             Existing and Developing Water Main Rehabilitation Practices,”  AWWA,
             Denver, Colo.
          Essex, R. J. (2007). “Geotechnical Baseline Reports for Construction Suggested
             Guidelines,” American Society of Civil Engineers, Reston, Va.
          Farshad, M. (2006). “Plastic Pipe Systems: Failure Investigation and Diagnosis,”
             Elsevier, Maryland Heights, Mo.
          Fraser, R., Howell, R. N., and Torielli, R. (1992). “Pipe Bursting: The Pipeline Insertion
             Method,” Proceedings of No-Dig International ’92, Washington, D.C.
          Gabriel, L. H. (2006). “Corrugated Polyethylene Pipe Design Manual and
             Installation Guide,” Plastics Pipe Institute, CPPA http://drainage.plasticpipe.
             org/Resources.Design_Manual.asp. Accessed July 14, 2006.
          Gumbel, J. E. (1998). “Structural Design of Pipe Linings 1998—Review of Principles,
             Practice and Current Developments Worldwide,” Paper presented at the 4th
             ASTT Conference, Brisbane, Australia , August (also available at http://www.
             insituform.com/resourceroom/resource_techpapersindex.html).
          Gunsaulis, F.R. and Levings, R. (2008). “Installation of Gravity Sewers using
             Horizontal Directional Drilling (HDD),” Proceedings of Pipelines Congress
             2008, July 22–27, 2008, Atlanta, GA, American Society of Civil Engineers,
             Reston, Va.
          Hair, J. D., and Hair, C. W, III. (1988). “Considerations in the design and installa-
             tion of horizontal drilled pipeline river crossings.” Proceedings of Pipeline
   441   442   443   444   445   446   447   448   449   450   451