Page 447 - Trenchless Technology Piping Installation and Inspection

References 397

Infrastructure Conference, Pipeline Division of the American Society of Civil
Engineers, Boston.
Hair (1994). “Drilling Fluids in Pipeline Installation by Horizontal Directional
Drilling,” A Practical Applications Manual, J. D. Hair & Associates, Inc., Tulsa,
Okla.
Howard, A. (1996). “Pipeline Installation: A Manual for Construction of Buried
Pipe,” Relativity Publishing, Lakewood, Colo.
Howell, N. (1995). “The Polyethylene Pipe Philosophy for Pipeline Renovation,”
Proceedings of No-Dig International ’95, Dresden, Germany, ISTT, UK.
Iseley, D. T. and Najafi, M. (eds.) (1995). “Trenchless Pipeline Rehabilitation.” The
National Utility Contractors Association (NUCA), Arlington, Va.
Iseley, D. T., Najafi, M., and Tanwani, R. (1999). “Trenchless Construction Methods
and Soil Compatibility Manual,” National Utility Contractors Association
(NUCA), Arlington, Va.
Janson, L. E. (1999). “Plastics Pipes for Water Supply and Sewage Disposal,”
Borealis, Stockholm.
Kroon, D. H., Lindemuth, D., Sampson, S., and Vincenzo, T. (2004). “Corrosion
Protection of Ductile Iron Pipe,” Proceedings of ASCE International Conference
on Pipeline Engineering and Construction, San Diego, Calif.
Lindeburg, M. (1992). “Civil Engineering Reference Manual for the PE Exam,”
Professional Publications Inc., Belmont, Calif.
Makar, J. M. (2000). “A Preliminary Analysis of Failures in Grey Cast Iron Water
Pipes,” Engineering Failure Analysis 7, Manual of Procedures for Pipe
Construction (1998), Office of Highway Management, Ohio Department of
Transportation, 43–53.
Makar, J. M., Desnoyers, R., and McDonald, S. E. (2001). “Failure Modes and
Mechanisms in Gray Cast Iron Pipe,” International Conference on Underground
Infrastructure Research: Municipal, Industrial and Environmental Applications,
Proceedings, Kitchener, Ontario, June 10–13, 2001, 1–10.
Marne, D. J. (2006). “National Electrical Safety Code 2007 Handbook,” McGraw-Hill
Professional, New York.
Moser, A. P. and Folkman, S. (2008). Buried Pipe Design, 3d ed., McGraw-Hill,
New York.
Najafi, M. (ed.) (2008). “Pipe Ramming Projects—ASCE Manuals and Reports
on Engineering Practice No. 115.” Reston, Va.
Najafi, M. (ed.) (2007). “Pipe Bursting Projects—ASCE Manuals and Reports
on Engineering Practice No. 112.” American Society of Civil Engineers,
Reston, Va.
Najafi, M. and Gokhale, S. (2005). Trenchless Technology: Pipeline and Utility Design,
Construction, and Renewal, McGraw-Hill, New York.
Najafi, M. and Kyoung, O. K. (2004). “Life-Cycle-Cost Comparison of Trenchless and
Conventional Open-Cut Pipeline Construction Projects,” Proceedings of ASCE
International Conference on Pipeline Engineering and Construction, San Diego,
Calif.
Najafi, M. (1994). “Trenchless Pipeline Rehabilitation: State-of-the-Art Review,”
Trenchless Technology Center, Ruston, La.
National Corrugated Steel Pipe Association (2000). “Corrugated Steel Pipe Design
Manual,” NCSPA, Dallas, Tex.
National Association of Sewer Service Companies (n.d.). “Guideline Specification for
the Replacement of Mainline Sewer Pipes by Pipe Bursting,” International Pipe
Bursting Association Guidelines, NASSCO, Baltimore, Md.
National Association of Sewer Service Companies (2008). “Inspector Training
Certification Program for the Inspector of Cured-In-Place Pipe installation, ver-
sion 2.0,” NASSCO, Baltimore, Md.
North American Society for Trenchless Technology (2008). Glossary of Terms, http://
nastt.org/glossary.php?index=P. NASTT, Arlington, Va.
Occupational Safety and Health Administration (OSHA) (2005). “Code of Federal
Regulations,” U.S. Department of Labor, Washington, D.C.
O’Day, D. K. (1986). “Water Main Evaluation for Rehabilitation/Replacement,”
AWWA Research Foundation, Denver, Colo.