Page 26 - Using ANSYS for Finite Element Analysis Dynamic, Probabilistic, Design and Heat Transfer Analysis
P. 26
Dynamic analysis • 13
For a better understanding of these options see the Commands
manual.
For this problem, we will use the default options so click on OK.
1. Apply constraints
Solution > Define Loads > Apply > Structural >
Displacement > On Keypoints Fix Keypoint 1
(i.e., all DOFs constrained).
2. Solve the system
Solution > Solve > Current LS
SOLVE
1.2.1.3 Postprocessing: Viewing the Results
1. Verify extracted modes against theoretical predictions
Select General Postproc > Results Summary...
The following window will appear:
