Page 145 - Using ANSYS for Finite Element Analysis A Tutorial for Engineers
P. 145
132 • Using ansys for finite element analysis
plate, which was expected to significantly increase the deflection at the
end of the plate.
0.000650 4.00
0.000640 3.75
Delection (mm) 0.000630 3.50 Stress (Mpa)
0.000620
3.25
0.000610 SEQV 3.00
USUM
0.000600 2.75
0 500 1000 1500 2000
Number of elements
Therefore, the results using ANSYS were determined to be appropri-
ate for the verification model.
15. Deformation:
General Postproc > Plot Results > Deformed Shape > Def +
undeformed
To view both the deformed and the undeformed object.
Observe the locations of deflection.
