Page 228 - A Comprehensive Guide to Solar Energy Systems
P. 228

Chapter 10 • CdTe Solar Cells  231



                   [46]  Regalado-Perez e, Reyes-Banda mG, mathew X: Influence of oxygen concentration in the CdCl2 treat-
                    ment process on the photovoltaic properties of CdTe/CdS solar cells, Thin Solid Films 582:134–138,
                    2015.
                   [47]  moutinho hR, Dhere RG, Al-Jassim mm, mayo B, levi Dh, Kazmerski ll: Induced recrystallization
                    of CdTe thin films deposited by close-spaced sublimation, Ncpv Photovolt Prog Rev 462:517–523,
                    1999.
                   [48]  moutinho hR, Dhere RG, Romero mJ, Jiang CS, To B, Al-Jassim mm. Recrystallization of PVD CdTe
                    thin films induced by CdCl 2  treatment - a comparison between vapor and solution processes. In: 33rd
                    Ieee photovoltaic specialists conference; 2008:1–5.
                   [49]  major JD, Bowen l, Durose K: Focused ion beam and field emission gun–scanning electron micros-
                    copy for the investigation of voiding and interface phenomena in thin-film solar cells, Prog Photovolt
                    Res Appl 20:892–898, 2012.
                   [50]  li C, Wu y, Poplawsky J, Pennycook TJ, Paudel n, yin W, et al: Grain-boundary-enhanced carrier col-
                    lection in CdTe solar cells, Phys Rev Lett 112:156103, 2014.
                   [51]  Quadros J, Pinto Al, moutinho hR, Dhere RG, Cruz lR: microtexture of chloride treated CdTe thin
                    films deposited by CSS technique, J Mater Sci 43:573–579, 2008.
                   [52]  Demtsu Sh, Albin DS, Pankow JW, Davies A: Stability study of CdS/CdTe solar cells made with Ag and
                    ni back-contacts, Sol Energy Mater Sol Cells 90:2934–2943, 2006.
                   [53]  Demtsu Sh, Sites JR: effect of back-contact barrier on thin-film CdTe solar cells, Thin Solid Films
                    510:320–324, 2006.
                   [54]  yan y, Jones Km, Wu X, Al-Jassim mm: microstructure of CdTe thin films after mixed nitric and phos-
                    phoric acids etching and (hgTe, CuTe)-graphite pasting, Thin Solid Films 472:291–296, 2005.
                   [55]  moutinho hR, Dhere RG, Jiang CS, Al-Jassim mm, Kazmerski ll: electrical properties of CdTe/CdS
                    solar cells investigated with conductive atomic force microscopy,  Thin Solid Films 514:150–155,
                    2006.
                   [56]  Corwine C, Pudov Ao, Gloeckler m, Demtsu Sh, Sites JR: Copper inclusion and migration from the
                    back contact in CdTe solar cells, Sol Energy Mater Sol Cells 82:481–489, 2004.
                   [57]  Gessert TA, Sheldon P, li X, Dunlavy D, niles D, Sasala R, et al. Studies of ZnTe back contacts to CdS/
                    CdTe solar cells. In: 26th Ieee photovoltaic specialists conference; 1997:419–422.
                   [58]  hu S, Zhu Z, li W, Feng l, Wu l, Zhang J, et al: Band diagrams and performance of CdTe solar cells with
                    a Sb 2 Te 3  back contact buffer layer, AIP Adv 1:42152, 2011.
                   [59]  Bhandari KP, Koirala P, Paudel nR, Khanal RR, Phillips AB, yan y, et al: Iron pyrite nanocrystal film
                    serves as a copper-free back contact for polycrystalline CdTe thin film solar cells, Sol Energy Mater Sol
                    Cells 140:108–114, 2015.
                   [60]  Turner AK, Woodcock Jm, ozsan me, Summers JG, Barker J, Binns S, et al: Stable, high efficiency thin
                    film solar cells produced by electrodeposition of cadmium telluride, Sol Energy Mater 23:388–393,
                    1991.
                   [61]  yang R, Wang D, Jeng m, ho K, Wang D: Stable CdTe thin film solar cells with a moo x  back-contact
                    buffer layer, Prog Photovolt Res Appl 24:59–65, 2016.
                   [62]  Viswanathan V, Tetali B, Selvaraj P, Jagannathan S, morel Dl, Ferekides CS, et al. ni 2 P-a promising
                    candidate for back contacts to CdS/CdTe solar cells. In: 28th Ieee photovoltaic specialists conference;
                    2000:587–590.
                   [63]  Barrioz V, Proskuryakov yy, Jones eW, major JD, Irvine SJC, Durose K, et al. highly arsenic doped CdTe
                    layers for the back contacts of CdTe solar cells. In: materials research society symposia proceedings;
                    2007:367–372.
                  [64]  Waters D, niles DW, Gessert TA, Albin D, Rose D, Sheldon P. Surface analysis of CdTe after various pre-
                    contact treatments. In: 2nd world conference on photovoltaic energy conversion; 1995:1031–1034.
   223   224   225   226   227   228   229   230   231   232   233