Page 328 - Applied Process Design For Chemical And Petrochemical Plants Volume III

66131_Ludwig_CH10H-J 5/30/2001 4:47 PM Page 287

Heat Transfer 287

Ishehara, K., J. W. Palen, and J. Taborek, “Critical Review of Corre- Milton, R.. M. and C. F. Gottyman, “High Efficiency Hydrocarbon
st
lations for Predicting Two-Phase Flow Pressure Drop Across Reboilers and Condensers,” AIChE 71 National Meeting,
Tube Banks,” Heat Trans. Eng., V. 1, No. 3, Jan.—March (1980). Dallas, TX, Feb. 21, (1972).
Jacobs, J. K., Hydrocarbon Processing, V. 40, No. 7 (1961) p. 189. Minton, R. E., “Desigining Sprial-Plate Heat Exchangers,” Chem.
Jacobs, J. L., P. S. O’Neill, and E. G. Ragi, “Effective Use of High Eng., May 4, (1970) p. 103.
Flux Tubing in Two-Phase Heat Transfer,” AIChE 86th Morcos, S. M. and A. E. Bergles, “Experimental Imidigation of
National Meeting Session 83, Houston, April (1979). Combined Forced Aid Free Laminar Connection in Hori-
Johnson, A. I., “Circulation Rates and Over-All Temperature Dri- zontal Tubes,” Trans. ASME Journal of Heat Transfer, V. 97, May
ving Forces in a Vertical Thermosiphon Reboiler,” presented (1975) p. 212.
at AIChE Heat Transfer Sym., Louisville, KY, Mar. 20 (1955). Mori, S., M. Kataya, and A. Tanimoto, “Performance of Counter-
Johnson, D. L., “Guidelines Given for Designing Vacuum Reboil- flows, Parallel Plate Heat Exchangers Under Laminar Flow
ers,” Oil and Gas Journal, Dec. 3 (1979) p. 63. Conditions,” Heat Trans. Eng., V. 2, July—Sept. (1980) p. 29.
Joshi, H. M., “Mitigate Fouling to Improve Heat Exchanger Relia- Mori, Y., K. Hiyikata, and K. Utsunomiya, “The Effect of Noncon-
bility,” Hydrocarbon Processing, V. 78, No. 1 (1999) p. 93. densable Gas on Film Condensation Along a Vertical Plate in
Karanth, N. G., “Predict Heat Exchanger Outlet Temperatures,” an Enclosed Chamber,” ASME Journal Heat Trans., V. 99, May
Hydrocarbon Processing, Sept. (1980) p. 262. (1977) p. 257.
Kern, D. Q. and R. E. Seaton, “Theoretical Analysis of Thermal Sur- Monroe, R. C., “Fans Key to Optimum Cooling Tower Design,” Oil
face Fouling,” Chem. Eng. Prog., V. 55, No. 6 (1959) p. 71. and Gas Journal, May 27, (1974) p. 52.
Kern, R. “How to Design Overheat Condensing Systems,” Chem. Mukherjee, R., “Broaden Your Heat Exchanger Design Skills,”
Eng., Sept. 15, (1975) p. 129. Chem. Eng. Prog., V. 94, No. 3, (1998) p. 35.
Kern, R., “How to Design Piping for Reboiler Systems,” Chem. Eng., Mukherjee, R, “Effectively Design Shell and Tube Heat Exchang-
Aug. 4, (1975) p. 107. ers,” Chem. Eng. Prog., V. 94, No. 2, (1988) p. 21.
Kern, R., “Thermosyphon Reboiler Piping Simplified,” Hydrocarbon Murty, K. N., “Assessing Fouling in Heat Exchangers,” Chem. Eng.,
Processing, V. 47, No. 12, Dec. (1968) p. 118. Aug 6, (1984) p. 93.
Kistler, R. S. and A. E. Kassem, “Stepwise Rating of Condensers,” Nauss, V. E. and F. V. Huber, “Air-Cooled Heat Exchangers,” Pollu-
Chem. Eng. Prog., V. 77, No. 7 (1981) p. 55. tion Eng., July (1974) p. 35.
Kraus, A. D. and D. Q. Kern, “The Effectiveness of Heat Exchangers Orrell, W. H., “Physical Considerations in Designing Vertical Ther-
with One Shell Pass and Even Numbers of Tube Passes,” ASME, mosyphon Reboilers,” Chem. Eng., Sept. 17, (1973).
AIChE-ASME Heat Transfer Conference, Aug. 8, (1965). Palen, J. W. and J. Taborek, “Solution of Shell Side Flow Pressure
rd
Kreith, F., Principles of Heat Transfer, 3 Ed., Intext Educational Pub. Drop and Heat Transfer by Stream Analysis Method,” Chem.
(1973). Eng. Prog., Sym. Ser. 65, No. 92 (1969).
Lewis, M. J., “An Elementary Analysis for Predicting the Momentus Parker, J. D., “Convection Defined, Classified to Aid Problem Solv-
and Heat Transfer Characteristics of a Hydraulically Rough ing, Heat Trans., Update—Part 3,” Pennwell Publishing Com-
Surface,” Trans. ASME Journal of Heat Transfer, V. 97, May pany, July (1980).
(1975) p. 249. Piret, E. L. and H. S. Isbin, H.S., “Two-Phase Heat Transfer in Nat-
Lineham, J. H., M. Petrick, and M. M. El-Wakil, “The Condensation ural Circulation Evaporator,” presented at AIChE Heat Trans-
of A Saturated Vapor on a Subcooled Film Drying Stratified fer Sym., St. Louis, MO., Dec. 13, (1953).
Flow,” AIChE Sym. on Heat Transfer, V. 66, No. 102. Polley, G. T., I. J. Gibbard, and B. Pretty, “Debottlenecking Using
Lord, R. C., P. E. Minton, and R. P. Slusser, “Design of Heat Exchan- Heat Transfer Enhancement,” Chem. Eng., V. 105, No. 5
ers,” Chem. Eng., Jan. 26, (1970) p. 127. (1998) p. 84.
Lord, R. C., P. E. Minton, and R. P. Slusser, “Design Parameters for Raben, I. A., R. T. Beaubouef, and G. Commerford, “A Study of
th
Condensers and Reboilers,” Chem. Eng., Mar. 23, (1970) p. 127. Nucleate Pool Boiling of Water at Low Pressure,” 6 Nat’l.
Lowry, J. A., “Evaluate Reboiler Fouling,” Chem. Eng., Feb. 13 Heat Transfer Conference, Boston, Aug. (1963), AIChE
(1978) p. 103. Preprint No. 28.
Magrini, V. and E. Mannei, “On the Influence of the Thickness and Raju, K. S. N. and J. Chand, “Consider the Plate Heat Exchanger,”
Thermal Properties of Heating Walls on the Heat Transfer Chem. Eng., Aug. 11, (1980) p. 133.
Coefficients in Nucleate Pool Boiling,” Trans. ASME Journal of Ramalho, R. S. and F. M. Tiller, “Improved Design Method for Mul-
Heat Transfer, May (1974) p. 173. tipass Exchangers,” Chem. Eng., Mar. 29 (1965) p. 87.
Malone, R. J., “Sizing External Heat Exchangers for Batch Reac- Rodriguez, F., “An Engineering View of Wind Chill,” Heat Trans.
tors,” Chem. Eng., Dec. 1 (1980) p. 95. Eng., V. 2, Oct.—Dec. (1980).
Marriott, J., “Where and How to Use Plate Heat Exchangers,” Rodriguez, F., and J. C. Smith, “When Non-Condensables Are Pre-
Chem. Eng., April 5, (1971) p. 127. sent Make a Nomograph to Find the Condensate Film Tem-
Mathur, J., “Performance of Steam Heat-Exchangers,” Chem. Eng., perature,” Chem. Eng., Mar. 10, (1958) p. 150.
Sept. 3, (1973) p. 101. Rohsenow, W. H., “A Method of Correlating Heat Transfer Data for
Maze, R. W., “Air vs. Water Cooling: How to Make the Choice,” Oil Surface Boiling of Liquids,” Heat Transfer Div. ASME,
and Gas Journal, Nov. 25, (1974) p. 125. Atlantic City, NJ. Meeting Nov. 25, (1951) Paper No. 51-A-110.
Medwell, J. O. and A. A. Nicol, “Surface Roughness Effects on Con- Rohsenow, W. M., “Nucleation with Boiling Heat Transfer,” Heat
densate Films,” ASME-AIChE Heat Trans. Conference and Trans. Div. ASME, Conference, Detroit, MI, May (1970),
Exhibit, Los Angeles, California, Aug. (1965), Paper No. 65- Paper No. 70-HT-18.
HT-43.