Page 138 - Applied Petroleum Geomechanics

130 Applied Petroleum Geomechanics

Mogi, K., 2007. Experimental Rock Mechanics. Taylor & Francis/Balkema.
Moos, D., Zoback, M.D., Bailey, L., 1999. Feasibility study of the stability of openhole
multilaterals, Cook Inlet, Alaska. Paper SPE-52186, SPE Mid-continent Operations
Symposium held in Oklahoma City, Oklahoma.
Murrell, S.A.F., 1963. A criterion for brittle fracture of rocks and concrete under triaxial
stress and the effect of pore pressure on the criterion. In: Fairhurst, C. (Ed.), Proc 5th
Rock Mech Symp. In Rock Mechanics. Pergamon, pp. 563e577.
Murrell, S.A.F., 1965. The effect of triaxial stress systems on the strength of rocks at at-
mospheric temperatures. Geophys. J. R. Astron. Soc. 10, 231e281.
Nadai, A., 1950. Theory of Flow and Fracture of Solids, vol. 1. McGraw-Hill, New York,
1950.
Najibi, A.R., Ghafoori, M., Lashkaripour, G.R., 2015. Empirical relations between strength
and static and dynamic elastic properties of Asmari and Sarvak limestones, two main oil
reservoirs in Iran. J. Pet. Sci. Eng. 126, 78e82.
Niandou, H., Shao, J.F., Henry, J.P., Fourmaintraux, D., 1997. Laboratory investigation of
the behaviour of Tournemire shale. Int. J. Rock Mech. Min. Sci. 34 (1), 3e16.
Ouyang, Z., Elsworth, D., 1991. A phenomenological failure criterion for brittle rock.
Rock Mech. Rock Eng. 24, 133e153.
Peng, S., Zhang, J., 2007. Engineering Geology for Underground Rocks. Springer.
Plumb, R., 1994. Influence of composition and texture on the failure properties of clastic
rocks. SPE-28022, presented at the 1994 Eurock Rock Mechanics in Petroleum
Engineering, 29e31 August, Delft, Netherlands.
Roscoe, K.H., Burland, J.B., 1968. On the generalised stress-strain behaviour of ‘wet’
clay. Engineering Plasticity. Cambridge University Press, pp. 535e609.
Roscoe, K.H., Schofield, A.N., Wroth, C.P., 1958. On the yielding of soils. Geotechnique
8 (1), 22e52.
Roscoe, K.H., Schofield, A.N., Thurairajah, A., 1963. Yielding of clays in states wetter than
critical. Geotechnique 13 (3), 211e240.
Schöpfer, M.P.J., Childs, C., Manzocchi, T., 2013. Three-dimensional failure envelopes and
the brittle-ductile transition. J. Geophys. Res. Solid Earth. 118, 1378e1392.
Shang, J., Hencher, S.R., West, L.J., 2016. Tensile strength of geological discontinuities
including incipient bedding, rock joints and mineral veins. Rock Mech. Rock Eng. 49,
4213e4225.
Singh, B., Raj, A., Singh, B., 2011. Modified MohreCoulomb criterion for non-linear
triaxial and polyaxial strength of intact rocks. Int. J. Rock Mech. Min. Sci. 48 (4),
546e555.
Spetzler, H.A., Sobolev, G.A., Sondergeld, C.H., Salov, B.G., Getting, I.C., Koltsov, A.,
1981. Surface deformation, crack formation, and acoustic velocity changes in pyro-
phyllite under polyaxial loading. J. Geophys. Res. 86, 1070e1080.
Vachaparampil, A., Ghassemi, A., 2013. Failure characteristics of three shales under true-
triaxial compression. Int. J. Rock Mech. Min. Sci. 100, 151e159.
Vernik, L., Bruno, M., Bovberg, C., 1993. Empirical relations between compressive
strength and porosity of siliciclastic rocks. Int. J. Rock Mech. Min. Sci. Geomech. Abstr.
30, 677e680.
Weingarten, J.S., Perkins, T.K., 1992. Prediction of sand production in gas wells: methods
and Gulf of Mexico case studies. Paper SPE-24797 Washington DC, 4e7, October.
Whittaker, B.N., Singh, R.N., Sun, G., 1992. Rock Fracture Mechanics: Principles, Design
and Applications. Developments in Geotechnical Engineering. Elsevier. Book 71.
Willson, S.M., Edwards, S.T., Crook, A., Bere, A., Moos, D., Peska, P., 2007. Assuring
stability in extended-reach wells e analyses, practice, and mitigations. SPE/IADC
105405.