Page 157 - 02. Subyek Computer Aided Design - Beginner’s Guide to SOLIDWORKS 2019- Level 1 by Alejandro Reyes

Part Modeling

Selecting a feature to fillet as in this example can only be done using the

fly-out FeatureManager or pre-selecting it in the FeatureManager before

selecting the "Fillet" command.

Now every edge inside is rounded in one operation with a single selection.

4.23. -Now we need to add four clearance holes for #6-32 screws in the corners.

We'll use the "Hole Wizard" feature from the Features tab. Switch to a Top view

for visibility and select the "Hole Wizard" icon.

D '

t View Insert Tools Window Help

~ Sw eptCut

Hole Fillet
Extrude \Nizard volved M'J l ofted Cut
Cut Cut ~

~ Boundary Cut

.__Di_m_Xp_e_rt_ s___,o · Hole-W~ard ..

Inserts a hole using a pre-defined

cross-section.

In the first step select the "Hole" specification icon. From the "Type" drop down list

select "Screw Clearances." From the "Size" selection list pick "# 6" and from "End

Condition" select "Through All." This will create a hole big enough for a #6 size

screw to pass freely through it.

151