Page 397 - 02. Subyek Computer Aided Design - Beginner’s Guide to SOLIDWORKS 2019- Level 1 by Alejandro Reyes

Beginner's Guide to SOLIDWORKS 2019- Level I

GJ Delete Face

~ X

Selections

tO Face< 1>

~ Show selection toolbar

Options

D Show preview

@ Using the "Delete" option would not close the openings causing our model

to become an open surface body. In the following image it looks like the

hole's surface is still there, but all we have is a surface with a hole in them

and open inside. Surfaces are covered in more depth in Beginner's Guide to

SOLIDWORKS Level II. The
(Q) Sensors
"Delete and Fill" option is usually

used to delete multiple

contiguous faces and replace DeleteFace1

them with a single surface. In g-o ~~ ...... ~

this particular case the end C!J Front Plane

result is the same using "Delete C!J Top Plane

and Patch" or "Delete and Fill". C!J Right Plane
t ~ ..

18.5. -Now we need to configure the center hole's diameter dimension. Double

click on the center hole to reveal its dimension and then double-click on it. Change

its value to 0.6" for the Forge configuration using the "This Configuration" button in

the "Modify" value box and rebuild the model.

Modify

0 1@Sketch2

396