Page 197 - Dynamic Loading and Design of Structures

Page 172

Di Paola, M. and La Mendola, L. (1992) ‘Dynamics of structures under seismic input motion
(Eurocode 8)’, European Earthquake Engineering, 6(2), 36–44.
EERI [Earthquake Engineering Research Institute, US] Committee on Seismic Risk (1989) ‘The
basics of seismic risk analysis’, Earthquake Spectra, 5(4): 675–702.
EERI (1995) ‘Northridge Earthquake of January 17, 1994 Reconnaissance Report-Vols. 1 and 2,
Earthquake Spectra, Suppl. to Vol. 11, April.
ESC (European Seismological Commission) (Working Group Macroseismic Scales) (1998) European
MacroseismicScale 1998 (EMS-98), Vol. 15, Cahiers du Centre Européen de Geo-dynamique et de
Seismologie, Luxembourg.
Fajfar, P. and Krawinkler, H. (eds) (1997) ‘Seismic Design Methodologies for the Next Generation of
Codes’, (paper given at International Workshop, Bled, Slovenia, June 1997, Balkema, Rotterdam.
FEMA [Federal Emergency Management Agency] (1995, 1997a) NEHRP Recommended Provisions
for Seismic regulations for New Buildings (1994, 1997 Edns) : Part 1—Provisions; Part 2-
Commentary, BSSC, Washington, DC.
FEMA (1997b) NEHRP Guidelines for the Seismic Rehabilitation of Buildings, FEMA-273,
Washington, DC.
Finn, W.D. L. (1991) ‘Geotechnical engineering aspects of microzonation’, paper given at 4th
International Conference Seismic Zonation, Stanford, CA, pp. 199–259.
Fischinger, M. and Fajfar, P. (1994) ‘Seismic force reduction factors’, paper given at 17th Regional
European Seminar on Earthquake Engineering, Haifa, Israel, September 1993 (Rutenberg, A., ed.),
Balkema, Rotterdam, pp. 279–96.
Gupta, A.K. (1990) Response Spectrum Method in Seismic Analysis and Design of Structures.
Blackwell Scientific Publications, Boston.
Housner, G.W. (1970) ‘Strong ground motion’, in R, L Wiegel (ed.) Earthquake Engineering,
Prentice-Hall, New Jersey, pp. 75–91.
Hu, Y.-X., Liu, S-C. and Dong, W. (1996) Earthquake Engineering. E & FN Spon, London.
International Conference of Building Officials (ICBO) (1997) Uniform Building Code–1997
Edition, Vol. 2: Structural Engineering Design Provisions, ICBO, Whittier, CA.
Joyner, W.B. and Boore, D.M. (1988) ‘Measurement, characterization, and prediction of strong
ground motion’, given at Earthquake Engineering and Structure Dynamics, Geotechnical Division
ASCE, Park City, UT, pp. 43–102.
Kappos, A.J. (1991) ‘Analytical prediction of the collapse earthquake for R/C buildings: suggested
methodology’, Earthq. Engineering Struct. Dynamics, 20(2): 167–76.
Kappos, A.J. (1999) ‘Evaluation of behaviour factors on the basis of ductility and overstrength
studies’, Engineering Structures, 21(9): 823–35.
Kramer, S.L. (1996) Geotechnical Earthquake Engineering, Prentice-Hall, Englewood Cliffs, NJ.
Krawinkler, H. and Nassar, A.A. (1992) ‘Seismic design based on ductility and cumulative damage
demands and capacities’, in: P. Fajfar & H. Krawinkler (eds.) Nonlinear Seismic Analysis and
Design of Reinforced Concrete Buildings, Elsevier Applied Science, London & New York, pp. 23–
39.
Martinez-Rueda, J.E. (1998) ‘Scaling procedure for natural accelerograms based on a system of
spectrum intensity scales’, Earthquake Spectra, 14(1): 135–52.
Mayes, R.L., Jones, L.R., and Kelly, T.E. (1990) ‘The economics of seismic isolation in buildings’.
Earthquake Spectra, 6(2): 245–63.
Miranda, E. and Bertero, V.V. (1994) ‘Evaluation of strength reduction factors for earthquake-resistant
design’, Earthquake Spectra, 10(2): 357–79.