Page 198 - Dynamic Loading and Design of Structures

Page 173

Naeim, F. and Kelly J.M. (1999) Design of Seismic Isolated S fractures: From Theory to Practice,
John Wiley, New York.
Naeim, F. and Lew, M. (1995) ‘On the use of design spectrum compatible time-histories’, Earthquake
Spectra, 11(1): 111–27.
Nau, J.M. and Hall, W.F. (1984) ‘Scaling methods for earthquake response spectra’, J. Struct.
Engineering, ASCE, 110(7): 1533–48.
Newmark, N.M. and Hall, J.W. (1982) Earthquake Spectra and Design. EERI, Berkeley, CA.
Penelis, G.G. and Kappos, A.J. (1997) Earthquake Resistant Concrete Structures. E & FN SPON
(Chapman & Hall), London.
Priestley, M.J. N., Seible, F. and Calvi G.M. (1996) Seismic Design and Retrofit of Bridges, John
Wiley, New York.
Reiter, L. (1991) Earthquake Hazard Analysis, Columbia University Press, New York.
SEAOC Seismology Committee (1996) Recommended Lateral Force Requirements and Commentary,
Structural Engineers Association of California, Sacramento, CA.
Shome, N., Cornell, C.A., Bazzuro, P. and Carballo, J.E. (1998) ‘Earthquakes, records, and nonlinear
responses’, Earthquake Spectra, 14(3), 469–500.
Skinner, R.I., Robinson, W.H. and McVerry, G.H. (1993) An Introduction to Seismic Isolation, John
Wiley, Chichester, UK.
Soong, T.T., Masri, S.F. and Housner, G.W. (1991) ‘An overview of active structural control under
seismic loads’, Earthquake Spectra, 7(3): 483–505.
Tso, W.K., Zhu, A.C. and Heidebrecht, A.C. (1992) ‘Engineering implication of ground motion A/V
ratio’, S oil Dynamic s Earthquake Engineering, 11(3), 133–44.
Wen, Y.K., Collin, K.R., Han, S.W. and Elwood, K.J. (1996) ‘Dual-level designs of buildings under
seismic loads’, Structural Safety, 18(2–3): 195–224.
Wilson, E.L., Der Kiureghian, A. and Bayo, E.P. (1981) ‘A replacement for the SRSS method in
seismic analysis’ (Short Communication), Earthquake Engineering Structure Dynamics, 9(2): 187–
94.
Wood, S.L. (1992) ‘Seismic response of R/C frames with irregular profiles’, journal Structural
Engineering,ASCE, 118(2): 545–66.
Zhu, T.J., Tso, W.K., and Heidebrecht, A.C. (1988) ‘Effect of peak ground a/v ratio on structural
damage’, journal Struct. Engineering, AS CE, 114(5): 1019–37.