Page 248 - Engineered Interfaces in Fiber Reinforced Composites

Chapter 5. Surface treatments of Jibers and effects on composite properties 229

AI-Moussawi, H., Drown, E.K., and Drzal, L.T. (1993). The silane/sizing composite interphase. Polvni.
Composites 14, 195-200.
Andreopoulos, A.G. (1989). A new coupling agent for aramid fibers. J. Appl. Polym. Sci. 38, 1053-1064.
Antoon, M.K.. Koenig, J.L. (1981). Irreversible effects of moisture on the epoxy matrix in glass-
reinforced composites. J. Polym. Sci.: Polym. Phys. Edition 19, 197-212.
Arnold, S.M., Arya, V.K. and Melis, M.E. (1990). Elastic/plastic analysis of advanced composite
investigating the use of the compliant layer concept in reducing residual stresses resulting from
processing, NASA TM-103204.
Bader, M.G.. Charalambides, B., Ling, J. (1991). The influence of fiber-matrix interface strength on the
tensile strength and failure mode in uniaxial CFRP. In Proc. ICCM- VIII, Composites: Design,
Manufacture and Application (S.W. Tsai and G.S. Springer, eds.), SAMPE Pub. Paper 111.
Baillie, C., Bader, M.G. (1991). Chemical aspects of interfacial adhesion between electrochemically
oxidized carbon fibers and epoxy resins. In Proc. ICCM- VIII, Composites: Design, Manufacture and
Applicufion (S.W. Tsai and G.S. Springer, eds.), SAMPE Pub. Paper I1 B.
Barczak, V.J. and Insley, R.H. (1962). J. Am. Ceram. Soc. 45, 144.
Bascom, W.D. (1965). in Proc. SPI2Oth Annual Tech. Con&, Reinf. Plast. 15-B.
Basche, M. (1969). In Interfaces in Composites. ASTM STP 452, ASTM. Philadelphia, PA, pp. 13CL136.
Bascom, W.D., Chen, W.J. (1991). Effect of plasma treatment on the adhesion of carbon fibers to
thermoplastic polymers. J. Adhesion 34, 99-1 19.
Bascom, W.D. and Drzal, L.T. (1987). The surface properties of carbon fibers and their adhesion to
organic polymers. NASA contract Report 4084.
Bender, B., Shadwell, D., Bulik, C., Incorvat, L. and Lewis 111, D. (1986). Effect of fiber coating and
compositc processing on properties of zirconia-based matrix Sic fiber composites. Am. Ceram. Soc.
Bull. 65, 363- 369.
Bennett, S.C. and Johnson, D.J. (1978). In Proc. 5th London Carbon and Graphite Conference, Vol. 1.
Society for Chemical Industry, London. p. 377
Birchall, J.D.. Bradbury, J.A.A. and Dinwoodie, J. (1985). Alumina fibers. In Handbook of Composirc.s
(W. Watt and B.V. Perov, eds.), Vol. I. Strong Fibers, North Holland, Amsterdam, pp. 115-155.
Birchall, J.D. (1986). Inorganic fibers. In Encyclopedia of’Material Science and Engineering (M.B. Bcvcr.
ed.), Pergamon Press, Oxford, pp. 2333-2335.
Biro. D.A.. Pleizeier, G. and Deslandes, Y. (19934. Application of the microbond technique. 111. Effects
of plasma treatment on the ultra-high modulus polyethylene fiber-epoxy interface, J. Mater. Sci. Lett.
11, 698-710.
Biro, D.A., Pleizeier, G. and Deslandes, Y. (1993b). Application of the microbond technique. IV.
Improved fiber-matrix adhesion by RF plasma treatment of organic fibers. J. Appl. Polym. Sci. 47.
883-894.
Brown, J.R., P.J.C. Chappell, Z. Mathys (199j). Plasma surface modification of advanced organic fibers:
part I. Effects on the mechanical, fracture and ballistic properties of aramid/ararnid composites. J.
Muter. Sci. 26, 4172417X.
Brown, J.R., P.J.C. Chappell. Z. Mathys (1992a). Plasma surface modification of advanced organic fibers:
part 11. Effects on the mechanical, fracture and ballistic properties extended chain polyethylene-epoxy
composites. J. Mater. Sci. 27, 3167-3172.
Brown, J.R.. P.J.C. Chappell. Z. Mathys (1992b). Plasma surface modification of advanced organic fibers.
part 111. Effects on the mechanical properties of aramid/vinylester and extended chain polyethylene!
vinylester composites. J. Mater. Sci. 27, 647556480.
Cantonwine. P.E. and H.N.G. Wadlcy (1994). The effect of fiber matrix reactions on the interface
properties in a SCS-6/Ti-24AI-llNb composite. Composite Eng. 4. 67-80.
Carlsson, J.O. (1986). Boron fibers, In Encyclopediu of Materials Science und Engineering (M.B. Bevcr.
ed.). Pergamon Press, Oxford, pp. 402-464.
Chaim, R. and Heuer, A.H. (1987). The interface between (Nicalon) Sic fibers and a glass-ceramic matrix.
Advonced Ceram. Mater. 2, 154158.
Chapman, A.R., Scott, V.D., Yang, M. (1991). In Proc. ICCM- VIII, Composites: Design, Manufacturiflg
and Application (S.W. Tsdi and G.S. Springer, eds.), SAMPE Pub. Paper 19G.