Page 255 - Engineered Interfaces in Fiber Reinforced Composites
P. 255

236               Engineered interfaces in fiber reinforced composites

                    Strife, J., Prewo, K.M. (1982). Silicon carbide fiber-reinforced resin matrix composites. .I. Mater. Sri. 17,
                      6572.
                    Sugerman,  G.,  Gabayson,  S.M.,  Chitwood,  W.E.  and  Monte,  S.J.  (1989).  In  Proc.  ECCM-3,
                      Developments  in  Science and  Technology of  Composite Materials (A.R. Bunsell, P.  Lamicq  and  A
                      Massiah, eds.), Elsevier Appl. Sci. London, pp. 51-56.
                    Sun, E.Y., Nutt, S.R. and Brennan, J.J. (1994). Interfacial microstructure and chemistry of SiC/BN dual-
                      coated Nicalon-fiber reinforced glass-ceramic matrix composites. J. Am. Ceram. Soc. 77, 1329-1239.
                    Sung, N.H.,  Dagli, G. and Ying, L. (1982). In Proc. 37th SPI Ann. Con6 Sect. 23-B.
                    Sung, N.H.,  Kahl, A.,  Ni,  S., Sung, C.S.P.,  Chin.  I.J. (1981).  In Proc. 36th Annual  Tech. Conf: Reinf.
                      Plast./Composite. SPI. Section 28.
                    Sutton, W.H.  (1966). In Proc. 21st Annud  Tech. Con$  Rein$  P/ast./Composite. SPI. Section 18A.
                    Suzuki,  Y.,  Maekawa, Z.,  Hamada,  H.,  Yokoyamd, A. and  Sugihara, T.  (1993). Influence of  silane
                      coupling  agents  on  interlaminar  fracture  in  glass  fiber  fabric  reinforced  unsaturated  polyester
                      laminates. J. Mater. Sci. 28, 1725-1723.
                    Takayanagi, M., Kajiyama, T., Katayose, T. (1982). J. Appl. Polym. Sci. 21, 390S3917.
                    Tissington, B., Pollard, G. and Ward, I.M. (1991). A study of the influence of fiberlresin adhesion on the
                      mechanical behavior of ultrahigh modulus polyethylene fiber composites. J. Muter. Sei. 26, 82-92.
                    Vaidya,  R.U.,  Fernando,  J.,  Chawkd,  K.K.  and  Ferber,  M.K.  (1992).  Effect  of  fiber coating on  the
                      mechanical properties of a Nextel-480 fiber reinforced glass matrix composites. Mater. Sei. Eng. A151,
                      161-169.
                    Vaughhan, D.J.  (1978). The  use  of  coupling agents to enhance the performance of  aramid reinforced
                      composites. Polym. Eng. Sci. 18,  167-169.
                    Verpoest,  I. and Springer, G.S. (1988).  Moisture characteristics  of aramid-epoxy  composites. J. Reinf:
                      Plust. Composites 7, 2-22.
                    Vidoz, A,, Camahort, J., Crossman, F. (1969). Development  of  nitride boron reinforced  metal  matrix
                      composites. J. Composire Mater. 3, 254261.
                    Wang, D.,  Jones  F.R.  and  Denison, P.  (1992a). Surface  analytical  study  of  the  interaction between
                      r-aminopropyltriethoxysilane (APS) and E-glass surface. Part  1-Time of  flight secondary  ion mass
                      spectroscopy. J. Mater. Sci. 27, 36-48.
                    Wang, D., Jones F.R. and Denison, P. (1992b). TOF SIMS and XPS study of the interaction of hydrolysed
                      r-aminopropykiethoxysilane (APS) and E-glass surface. J. Adhesion Sei. Technol. 6, 79-98.
                    Wang, D., Jones F.R. and Denison,  P. (1992~). A TOF SIMS study of the incorporation of aluminum
                      into the silane coating on E-glass fibers. Cutalysis  Today 12, 375-383.
                    Wang, D. and Jones F.R. (1993a). TOF SIMS and XPS study of the interaction of silanized E-glass with
                      epoxy resin. J. Mater. Sci. 28, 13961408.
                    Wang, D. and Jones F.R. (1993b). TOF SIMS and XPS study of the interaction of silanized E-glass with
                      epoxy resin. J. Mater. Sci. 28, 2481-2488.
                    Wang, Q., Ait-kadi, A. and Kaliaguine, S. (1992a). Catalytic grafting: a new technique for polymer/fiber
                      composites. 11. Plasma treated UHMPE fibers/polyethylene composites. J. Appl. Polym. Sci. 45, 1023-
                      1033.
                    Wang, Q., Kaliaguine, S. and Ait-kadi, A. (1992b). Polyethylene-plasma treated Kevlar fiber composites:
                      analysis of the fiber surface, J. Appl. Polym. Sci. 48,  121-136.
                    Ward, I.M. (1985). Preparation, properties and structure of high modulus polyolefines and polyoxym-
                      ethylene.  In  Handbook  of  Composites,  Vol.  1.  Strong  Fibers  (W.  Watt  and  B.V.  Perov,  eds.),
                      Northholland, Amsterdam, pp. 705-741.
                    Ward,  I.M.  (1993).  A  review  of  recent  developments  in  the  processing  and  properties  of  oriented
                      polyethylene. Plastics, Rubber and  Composites  Proc. Appl. 19, 7-13.
                    Ward, I.M. and Ladizesky, N.H. (1986). High modulus polyethylene fibers and their composites. In Proc.
                      ICCI-I, Composite Interfaces (H. Ishida and J.L.  Koenig, eds.), Elsevier, New York, pp. 3746.
                    Ward-Close,  C.M.  and  Partridge,  P.G.  (1990).  A  fiber  coating  process  for  advanced  metal  matrix
                      composites, J. Mater. Sci. 25, 4315-4323.
                    Warrier, S.G., Blue, C.A. and Lin, R.Y. (1993). Control of interfaces in A1-C fiber composites. J. Muter.
                      Sci. 28, 760-768.
   250   251   252   253   254   255   256   257   258   259   260