Page 256 - Engineered Interfaces in Fiber Reinforced Composites

Chapter 5. Surfhce treatments qfJibers and effecis on composite properties 237

Warwick, C.M.. Kiescheke, R.R. and Clyne, T.W. (1991). Sputter deposited barrier coatings on SIC
monofilaments for use in reactive metallic matrices - part 11. System stress state. Acta Metall. Marer.
39,437444.
Wawner, F.E., Jr. (1 988). Boron and silicon carbide/carbon fibers. In Fiber Reinfi)rcementsfbr Composite
Materials (A.R. Bunsell ed.), Elsevier, Amsterdam, pp. 371-425.
Wawner, F.. Nutt, S. (1980). Investigation of diffusion barrier materials on Sic filaments. Cerani. Eng.
Sci. Proc. 1. 709-719.
Wertheimcr, M.R. and Schreibcr, H.P. (1981). Surface property modification of aromatic polyamides by
microwave plasmas. J. Appl. Polym. Si. 26, 2087-2096.
Wright, W.W. (1990). The carbon fibcr-epoxy resin interfaccs-a review, part I. In Composite Po/i.mw
Vol. 3. (P. Dickin, ed.), pp. 231-401.
Wu, J.X. Li, P.X., Gu, M.Y. and Wu, R.J. (1993a). Interface evolution and its relationship with fracture
strength in CiAI, A/AI-Ti and C/AI--Cu composite materials. Compmitu Interjaces 1. 75-86.
Wu. J.X.. Liu, W.. Li, P.X. and Wu, R.J. (1993b). Effect of matrix alloying elements on the corrosion
resistance of CiAl composites materials. J. Muter. Sci. Lett. 12, 150&1501.
Yajima. S., Hayashi. J., Omori, M. and Okamura, K. (1976). Development of a silicon carbide fiber with
high tensile strength. Nature 261, 683-685.
Yajima, S.. Hasegawa, Y., Hayashi, J., Iimura, M. (1978). Synthesis of continuous silicon carbide fiber
with high tensile strength and high Young's modulus. part I, synthesis of polycarbosilane as precursor.
J. Mater. Sri. 13, 2569-2576.
Yajima, S., Okamura. K., Matsuwa, T., Hasegawa, Y., Shishido. T. (1979). Anomalous characteristics or
the microcrystalline state of SIC fibers. Nature 279, 706707.
Yamamoto, M.. Yamada, S.. Sakatani, Y., Taguchi. M.. Yamaguchi, Y. (1971). In Proc. 1st Curhot? Fihw
Conf: Plast. Inst., London. p. 179.
Yao, Y., Liu. X. and Zhu. Y. (1993). Surface modification of high-density polyethylenc by plasma
treatment. J. Adhesion Sci. Techno/. 7. 63-75.
Yoon, H.S. and Okura, A. (1990). The influence of interfacial reaction on the strength of C:AI
composites. SAMPE J. 26, 19-27.
Yu. Z., Ait-kadi. A. and Brisson, J. (199la). Nylon/Kevlar composites: 1. Mechanical properties. Po/j,nf.
Eng. Sci. 31. 1222-1227.
Yu. Z., Ait-kadi. A. and Brisson, J. (1991b). Investigation of interfaces. Polym. Eng. Sci. 31. 1228-1232.
Yuan, L.Y., Shyu, S.S., Lai. J.Y. (1991). Plasma surface treatments on carbon fibers, 11. mechanical
properties and interfacial shear strength. J. Appl. Polym. Sci. 42, 2525-2534.
Zhuang, W.D. and Zhang, G.D. (1991). Designing the matrix of Gr/AI Composites. In Proc. ICCM/VIII,
Composite Design, Manufucture and Applicution (S.W. Tsai and G.S. Springer, eds.), SAMPE. Pub.
Paper 19H.