Page 254 - Engineered Interfaces in Fiber Reinforced Composites

Chaptcr 5. Surface treatments qf’,fibers and effects on composite properties 235

Outwater, J.O. (1956). In Proc. 11th Annual Tech. Cont Reinforced Plastics Div. SPI Sec. 9-B.
Plueddemann, E.P. (1972). Cationic organofunctional silane coupling agents. In Proc. 27th Annual Tech.
Conf. Rein$ Plustic. SPI, Section 21-B.
Plueddemann, E.P. (1974). In Interfaces in Polymer Matrix Composites, Composite Materials, Vol. 6
(E.P. Plueddemann ed.), Academic Press. New York.
Plueddemann, E.P., Clark, H.A., Nelson, L.E. and Hoffmann, K.R. (1962). Modern Plastics 39, p. 135.
Plueddemann, E.P. (1981). Principals of interfacial coupling in fiber-reinforced plastics, Int. J. Adhesion
Adhesive I, pp. 305-310.
Plueddemann, E.P. (1982). Silane Coupling Agents, Plenum Press, New York.
Plueddemann, E.P. (1988). Present status and research needs in silane coupling. In Proc. ICCI-II,
Interfaces in Polymer, Ceramic and Metal Matrix Composites (H. Ishida ed.), Elsevier Sci. Pub. New
York, pp. 17-33.
Plueddemann, E.P. and Stark, G.L. (1980). In Proc. 35th Annual Tech. Cor$ Reinj: Plast./Composite. SPI.
Section 20-B.
Prewo, K.M. and McCarthy, G. (1972). Interfacial characterization of silicon carbide coated boron
reinforced aluminum matrix composites. J. Mater. Sci. 7, 919-928.
Prouhet, S., Camus, G., Labrugere, C., Gette, A. and Martin, E. (1994). Mechanical characterization of
Sic fiber/SiC (CVD) matrix composites with a BN-interphase. J. Am. Ceram. Soc. 77, 649-659.
Riess, G., Bourdeux, M., Brie, M., Jouquet, G. (1974). Carbon Fibers - Their Place in Modern
Technology, Plast. Inst., London, p. 52.
Riggs, D.M., Shuford, R.J., Lewis, R.W. (1982). In Handbook of Composites (G. Lubin ed.), Van
Nostrand Reinhold, New York, Ch. 2.
Rochow, E.G. (1951). An Introduction to the Chemistry ofSilane, 2nd. ed., Chapman & Hall, London.
Rostami, H., Iskandarni, B. and Kamel, I. (1992). Surface modification of Spectra 900 polyethylene fibers
using RF-plasma. Polym. Composites 13, 207-21 2.
Ryder, C., Vidoz, A,, Crossman, F., Camahort, J. (1970). Mechanical properties of nitrided boron-
aluminium composites. J. Composite Mater. 4, 264272.
Schrader, M.E., Lerner, 1. and D’oria, F.J. (1967). Modern Plastics 45, 195.
Schrader, M.E. (1970). Radioisotopic studies of bonding at the interface. J. Adhesion 2, 202-212.
Schrader, M.E. and Block, A. (1971). Tracer study of kinetics and mechanism of hydrolytically induced
interfacial failure. J. Polym. Sci.. Part C, Polym. Symposia. 34, 281-291.
Schrader, M.E. (1974). In Composite Materials (L.J. Broutman and R.H. Krock, eds.). Vol. 6, Academic,
New York, p. 109.
Scolar, D.A. (1974). In Interfaces in Polymer Matrix Composites. Composite Materials, Vol. 6 (E.P.
Plueddemann ed.). Academic Press, New York, pp. 217-284.
Siadati, M.H., Chawla, K.K. and Ferber, M. (1991). The role of the Sn02 interphase in an alumina/glass
composite: a fractographic study. J. Mater. Sci. 26, 2743-2749.
Silverstein, M.S. and Breuer, 0. (1993a). Mechanical properties and failure of etched UHMW-PE fibers.
J. Mater. Sci. 28, 41534158.
Silverstein, M.S. and Breuer. 0. (1993b). Adhesive properties and failure of etched UHMW-PE fibers.
J. Mater. Sci. 28, 47184724.
Silverstein, M.S. and Breuer, 0. (1993~). Relationship between surface properties and adhesion for etched
UHMW-PE fibers. Composites Sci. Technol. 48, 151-157.
Singer, L.S. (1 989). Carbon fiber reinforced plastics. In Concise Encyclopedia qf’ Composite Materials (A.
Kelly. ed.), Pergamon Press, Oxford, pp. 39-55.
Singh, R.N. (1988). Role of fiber-matrix interfacial shear stress on the toughness of reinforced oxide
matrix composites. In High TemperaturelHigh Performance Composites, Mat. Res. Soc. Symp. Proc.,
Vol. 120 (F.D. Lemkey, S.G. Fishman, A.G. Evans and J.R. Strife, eds.), MRS, Pittsburgh, PA.
pp. 259-264.
Singh, R.N. and Gaddipati, A.R. (1991). A uniaxially reinforced zirconia-silicon carbide composite.
J. Muter. Sci. 26, 957.
Singh, R.N. (1993). Interfacial properties and high temperature mechanical behavior of fiber reinforced
ceramic fiber reinforced ceramic composites. Mater. Sci. Eng. A 166, 185-198.