Page 344 - Engineered Interfaces in Fiber Reinforced Composites

Chapter 7. Improvement of’ transverse fracture toughness with interface control 325

Mascia. L., Dhillon, J. and Harper, J. (1993). Adhesion enhancement of rubbery and ductile polyolefin
coatings on glass fibers for epoxy composites and effects on failure mechanisms. J. Appl. Polym. Sci.
47,487-498.
Metcalfe, A.G. (1974). Interfaces in Metal Matrix Composites, Composite Materials, Vol. I. Academic
Press, New York.
Metcalfe A.G. and Schmitz G.K. (1964). ASTM Proc. 64, 1075.
Misra, A. (1991). Chemical compatibility issues related to the use of copper as an interfacial layer for Sic
fiber reinforced Tidl + Nb composite. NASA CR-187100.
Mitaka, Y. (1994). Stress field in a continuous fiber composite with a variable interphase under thenno-
mechanical loadings. J. Eng. Mater. Technol. 116, 367-377.
Mitaka, Y. and Taya, M. (1985a). Stress field in a coated continuous fiber composite subjected to thermo-
mechanical loadings. J. Composite Mater. 19, 554-578.
Mitaka, Y. and Taya, M. (1985b). Stress field in and around a coated short fiber in an infinite matrix
subjected to uniaxial and biaxial loadings. J. Appl. Mech. 52, 19-24.
Mitaka, Y. and Taya, M. (1986). Thermal stress in a coated short fiber composites. J. Appl. Mech. 53,
681-689.
Mital, S.K., Murthy, P.L.N. and Chamis, C.C. (1993). Interfacial microfracture in high temperature metal
matrix composite. J. Composite Mater. 27, 1678-1694.
Morel, M., Saravanos, A. and Chamis, C.C. (1991). Interphase layer optimization for metal matrix
composites with fabrication consideration. NASA TM-105166.
Mullin J.V., Berry J.M. and Gatti A. (1968). Some fundamental fracture mechanisms applicable to
advanced filament reinforced composites. .I. Composite Muter. 2, 82-103.
Mullin J.V. and Mazzio V.F. (1972). The effects of matrix and interface modification on local fractures of
carbon fibers in epoxy. J. Mech. Phys. Solids 20, 391400.
Nairn, J.A. (1985). Thermoelastic analysis of residual stresses in unidirectional high-performance
composites. Polym. Composites 6, 123-1 30.
Novak R.C. (1969). Fracture in graphite filament reinforced epoxy loaded in shear. In Composite
Materials: Testing and Design, ASTM STP 460, ASTM, Philadelphia, PA, pp. 54C549.
Ochi, M., Yamazaki, K. and Shimbo, M. (1989). Internal stress of epoxide resin modified with spiro
ortho-ester type resin: part 2. Relation between internal stress and phase structure. J. Mater. Sci. 24,
3 1 89-3 1 9 5.
Pagano, N.J. and Tandon, G.P. (1988). Elastic response of multi-directional coated fiber composites.
Composite Sci. Technol. 31, 273-293.
Pagano, N.J. and Tandon, G.P. (1990). Thenno-elastic model for multidirectional coated fiber
composites: Traction formulation. Composites Sci. Technol. 38, 247-269.
Patrikis, A.K., Andrews, M.C. and Young, R.J. (1994). Analysis of the single fiber pull-out test by the use
of Raman spectroscopy: part I: Pull-out of aramid fibers from an epoxy resin. Composites Sci.
Technol. 52, 387-396.
Peiffer D.G. (1979). Impact strength of thick interlayer composites. .I. Appl. Polym. Sci. 24, 1451-1455.
Peiffer D.G. and Nielsen L.E. (1979). Preparation and mechanical properties of thick interlayer
composites. J. Appl. Polym. Sei. 23, 2253-2264.
Piggott M.R. (1970). Theoretical estimation of fracture toughness of fibrous composites, J. Mater. Sci. 5,
669-675.
Piggott M.R. (1981). Fiber length-strength relationships and the fracture of composites. In Proc. 5th
International ConJ Fracture (ICF-j), pp. 465472.
Piggott M.R., Lam P.K., Lim J.T. and Woo M.S. (1985). The internal pressure, mechanical properties
and water absorption of carbon fiber composites with spiro-epoxy copolymer matrices. Composites
Sci. Technol. 23, 247-262.
Piggott, M.G. and Woo, M.S. (1986). Fiber composites with internal stresses under control. Polym.
Composites 7, 182-1 85.
Popejoy, D.B. and Dharani, L.R. (1992). Effect of fiber coating and interfacial debonding on crack
growth in fiber-reinforced composite. Theor. Appl. Fract. Mech. 18, 73-79.
Porter, D.L. and Heuer, A.H. (1977). Mechanisms of toughening partially stabilized zirconia (PSZ).
J. Am. Ceram. Soc. 60, 183-184.