Page 342 - Engineered Interfaces in Fiber Reinforced Composites

Chapter 7. Improvement of transverse .fracture toughness with interface control 323

Ishikawa, T., Fuknnaga, H. and Ono, K.I. (1989). Graphitexpoxy laminates with almost null coefficient
of thermal expansion under a wide range of temperature. J. Muter. Sei. 24, 2011-2017.
Jahankhani H. and Galiotis C. (1991). Shear stress distribution in model composites. Part 1. A Kevlar 49
fiber in an epoxy matrix. J. Composite Mater. 25, 609-631.
Jang B.Z., Lieu Y.K.. Chung W.C. and Hwang L.R. (1987). Controlled energy dissipation in fibrous
composites, I. Controlled delamination. Polym. Composites 8, 94-102.
Jansson. S. and Leckie, F.A. (1992). Reduction of thermal stresses in continuous fiber reinforced metal
matrix composites with interface layer. J. Composite Muter. 26, 14761486.
Jao, S.H. and McGarry, F.J. (1992a) On the failure work and modulus of composites reinforced by thin
elastomer-coated fibers. J. Composite Muter. 26, 2632-2654.
Jao, S.H. and McGarry, F.J. (1992b). Interphase bond strength and energy absorption of injection-
molded rubber coated glass/nylon composites. J. Reinforced Plus?. Composite 11, 81 1-835.
Jayaraman, K. and Reifsnider, K.L. (1992). Residual stresses in a composite with continuously varying
Young’s modulus in the fiber/rnatrix interphase. J. Composite Muter. 26, 77s791.
Jayaraman, K. and Reifsnider, K.L. (1993). The interphase in unidirectional fiber reinforced epoxics:
effect on residual thermal stresses. Composites Sci. Techno/. 47, 119-129.
Jayaraman, K.L., Reifsnider, K.L. and Swain, R.E. (1993). Elastic and thermal effects in the interphase:
Part 11. Comments on modelling studies. J. Composite ’ftchnol. Res. (JCTRER) 15, 14-22.
Jed L.C. and Felbeck D.K. (1980). Increased fracture toughness of graphite epoxy composites through
intermittent interlaminar bonding. J. Composite Muter. 15, 245-1 59.
Jero. P.D. and Kerans, R.J. (1991). Effect of interfacial roughness on the frictional stress measured using
push-out tests, J. Am. Cerum. Soc. 74, 2793-2801.
Jeronimidis. G. and Parkyn. A. (1988). Residual stresses in carbon fiber-thermoplastic matrix laminates,
J. Composite Muter. 22, 401415.
Jones, F.R. (1 994). Laminates-residual thermal and related stresses. In Handbook of Polymer Fiber
Composites (F.R. Jones, ed.), Longman Scientific & Technical, Essex, England, pp. 254-260.
Jun, W.J. and Hong C.S. (1990). Effects of residual shear strain on the cured shape of asymmetric cross-
ply thin laminates. Composites Sci. Techno/. 38, 55-67.
Kardos J.L. (1981). Strength of oriented short fiber reinforced plastics. In Proc. 36th Annual Tech CO~!/:
Reinforced Plast. Composites, SPI. Paper 2E.
Kelly A. (1970). Interface effects and the work of fracture of a fibrous composites. Proc. Roy. Sor. Lond.
A 319, 95-1 16.
Keran, R.J. and Parthasarathy, T.A. (1991). Theoretical analysis of the fiber pull-out and push-out tests.
J. Am. Ceram. Soc. 74, 1585-1596.
Kim, J.K. and Mai, Y.W. (199la). High strength, high fracture toughness fiber composites with interface
control - A review. Composites Sci. Technol. 41, 333-378.
Kim, J.K. and Mai, Y.W. (1991b). The effect of interfacial coating and temperature on the fracture
behaviours of unidirectional KFRP and CFRP. J. Mater. Sei. 26, 47014720.
Kim, J.K. and Mai. Y.W. (1993a). Interfaces in Composites. Ch. 6 in Muteriais Science and Technology:
Vol. 13 S!ructure und Properties uj Fiber Composites (T.W. Chou ed.), VCH, Weinheim, Germany.
Ch. 6, pp. 229--289.
Kim, J.K. and Mai, Y.W. (1993b). Fracture of CFRP containing impregnated fiber bundles. Composites
Sci. Technol. 49. 51-60.
Kim, J.K. and Mai, Y.W. (1996a). Micromechanics of fiber-matrix interface and fracture of advanced
composites with engineered interfaces. In Fracture Mechanics: 25ih Volume, ASTM STP 1220 (F.
Erdogan and R.J. Hartranft, eds.), ASTM, Philadelphia, PA, pp. 125-139.
Kim, J.K. and Mai, Y.W. (1996b). Modelling of stress transfer across the fiber-matrix interface. In
.Numerical Analysis and Modelling of Composite Muteriuls. (J. Bull ed.). Blackie Academic &
Professional, Glasgow, Ch. 10, pp. 287-326.
Kim. J.K., Mai. Y.W. and Kennedy, B.J. (1992). Surface analysis of carbon fibers modified with PVAL
coating and the composite interfaces. J. Muter. Sei. 27, 681 1-6816.
Kim, J.K., Zhou, L.M. and Mai, Y.W. (1994a). Techniques for Studying Composite Interfaces. In
Handbook of’ Advanced Muteriuls Tesring (N.P. Cherernisinoff ed.), Marcel Dekker, New York, 1994.
pp. 327-366.