Page 57 - Engineered Interfaces in Fiber Reinforced Composites

40 Engineered interfaces in fiber reinforced composites

Kim, J.K. and Mai, Y.W. (1993). Interfaces in composites. In Structure and Properties of Fiber
Composites, Materials Science and Technology, Series Vol. 13 (T.W. Chou ed.) Ch. 6, VCH
Publication, Weinheim, Germany, pp. 239-289.
Kim, J.K., Mai, Y.W. and Kennedy, B.J. (1992). Surface analysis of carbon fibers modified with PVAL
coating and the composite interfaces. J. Mater. Sci. 27. 681 1-6816.
Kinloch, A.J. (1980). Review - The science of adhesion. part 1, surface and interfacial aspects. J. Mater.
Sei. 15, 2141-2166.
Kinloch, A.J. (1982). Review - The science. of adhesion. part 2, mechanics and mechanisms of failure.
J. Mater. Sci. 17, 617451.
Kinloch, A.J., Kodokian, G.K.A. and Watts, J.F. (1992). The adhesion of thermoplastic fiber composites.
Phil. Trans. Roy. SOC. Lond. A338, 8S112.
Lee, L.H. (1991). Fundamentals of Adhesion (Lee, L.H. ed.), Plenum Press, New York. pp. 1-30.
Lee, S.M. (1989). Surface analysis of polymer composites. In Reference Book for Composite Technolog-y 2
(S.M. Lee ed.), Technomic, Lancaster, PA. USA, pp. 81-103.
Lee, W.J., Seferis, J.C. and Berg, J.C. (1988). Characterizing high performance composite processability
with dynamic fiber wettability measurements. Pofym. Composites 9, 3641.
Liao, Y.T. (1989). A study of glass fiber-epoxy composite interfaces. Polym. Composites 16, 424428.
Maso, J.C. (1993). Interfaces in Cementitious Composites, E &FN Spon, London &New York.
Metcalfe, A.G. (1974). Interfaces in metal matrix composites. Composite Materials Series Volume 1. (A.G.
Metcalfe ed.), Academic Press, New York, pp. 65-123.
Miller, J.D. and Ishida, H. (1986). In Chemically Modified Surfaces, Vol. 1. Silane, Surfaces and
Interfaces. (K. Leyden ed.), Gordon and Breach, New York. p. 525.
Nakahara, M., Nakayama, Y. Katagiri, G. and Shimizu, K. (1991). Anodic oxidation effects on pyrolytic
graphite surfaces in acid. J. Mater. Sei. 26, 861-864.
Nardin M. and Ward, I.M. (1987). Influence of surface treatment on adhesion of polyethylene fibers.
Mater. Sci. Technol. 3, 814826.
Naslain, R. (1993). Fiber-matrix interphase and interfaces in ceramic matrix composites processes by
CVI. Composite Interfaces 1, 253-286.
Neumann, A.W., Absolom, D.R., Francis, D.W. and van Oss C.J. (1980). Conversion tables of contact
angles to surface tension: For use in determining the contribution of the van der Waals attraction or
repulsion to various separation processes. Separ. Pur$ Mech. 9, 69-163.
Neumann, A.W. and Good, R.J. (1979). In Surface and Colloid Science, Vol. 2, (R.J. Good and R.R.
Stromberg eds.), Plenum Press, New York.
Neumann, A.W. and Good, R.J., Hope, C.J. and Sejpal, M. (1974). An equation od state approach to
determine surface tension of low energy solids from contact angles. J. Colloid. Interface Sci. 49, 291-
303.
Neumann, A.W. and Renzow, D. (1969). 2. Phys. Chemi Neue Forge 68, 11.
Owen, D.K. and Wendt, R.C. (1969). Estimation of the surface free energy of polymers. J. Appf. Polym.
Sci. 13, 1741-1747.
Plueddemann, E.P. (1974). In Zntet$aces in Polymer Matrix Composites, Composite Materials Vol. 6. (E.P.
Plueddemann ed.), Academic Press. New York.
Plueddemann, E.P. (1988). Present status and research needs in silane coupling. In Proc. ZCCZ-IZ,
Interfaces in Polymer. Ceramic and Metal Matrix Composites. (H. Ishida ed.), Elsevier Sci. Pub. New
York. pp. 17-33.
Plueddemann, E.P., Stark, G.L. (1980). In Proc. 35th Annual Tech. Con$ Reinf. Plast.lComposite. SPI.
Section 20-B.
Robinson, I.M., Yeung, P.H.J., Galiotis, C. and Young, R.J., Batchelder, D.N. (1986). Stress induced
twinning of polydiacetylene single crystal fibers in composites. J. Mater. Sei. 21, 3-3444.
Robinson, I.M., Zakikhani, M. Day, R.J., Young, R.J. and Galiotis, C. (1987). Strain dependence of the
Raman frcquencies for different types of carbon fibers, J. Mater. Sci. Left. 6, 1212-1214.
Rudy, E. (1969). A compendium of phase diagram, AFML-TR-65-2, Part V.
Scolar, D.A. (1974). In Interfaces in Polymer Matrix Composites, Composite Materials, Vol. 6 (E.P.
Plueddemann ed.), Academic Press, New York, pp. 217-284.