Page 233 - Engineering Plastics Handbook
P. 233
BN30 BN9003 BN5308 BN31 1.04 1.09 1.10 1.09 7000 (48) 7300 (50) 7000 (48) 6200 (43) 47 34 — — 295,000 (2.03) 319,000 (2.20) 350,000 (2.41) 325,000 (2.24) 10,400 (72) 10,400 (72) 10,500 (72) 8600 (59) 8.2 (438) 7.5 (401) 5.0 (267) 5.0 (267) 5.0 (267) — 2.0 (107) — 35.0 (47
Properties of PPE/PS Blow Molding-Grades Property Inst. impact E at peak, 73°F (23°C), ft⋅lb (J) CTE, flow −40 to 200°F, in/in-°F (m/m-°C)
TABLE 9.8 Specific gravity Tensile strength at yield, psi (MPa) Tensile elongation at break, % Flexural modulus, psi (GPa) Flexural strength, psi (MPa) NI at 23°C, ft⋅lb/in (J/m) NI at −40°F/°C, ft⋅lb/in (J/m) HDT at 66 psi (0.45 MPa), °F (°C) HDT at 264 psi (1.82 MPa), °F (°C) RTI electrical
200
