Page 66 - Engineering Plastics Handbook

40 Introduction

TABLE 3.2 Selected ASTM and Similar ISO Standards [1] (Continued)
ASTM/2000 Standard test methods and specifications ISO
D3835 Determination of properties of polymeric 11443
materials by means of a capillary rheometer,
shear sweep
D3846 Double notch shear test —
D3853 Determination of properties of polymeric 11443
materials by means of a capillary rheometer,
thermal stability
D3935 Polycarbonate (PC) unfilled and reinforced 7391-1
materials 7391-2
D3965 Rigid acrylonitrile-butadiene-styrene (ABS) 7245
compound for pipe and fittings
D4001 Determine weight (MW) average by —
light scattering
D4065-01 Determining and reporting dynamic 6721-1
mechanical properties, plastics
D4066 Nylon 6, 66 and 612 injection and 1874-1
extrusion materials 1874-2
D4067-03 Standard specifications for reinforced and —
filled polyphenylenesulfide (PPS) injection
molding and extrusion materials
D4092-01 Standard terminology for dynamic 6721
mechanical measurements
on plastics
D4181 Standard specifications for acetal (POM) DIS9988-1
molding and extrusion materials DIS9988-2
D4226 Falling dart impact resistance (Gardner —
impact); see also D5420, D5628
D4329 Weathering QUV; also see D4587, D2565, 4892
D4459
D4349 Poly(phenylene ether) (PPE) materials DIS15103-2
DIS15103-1
D4440-01 Rheological measurements of polymer 6721-10
melts using dynamic mechanical
procedures
D4473-01 Test methods for plastics; dynamic —
mechanical properties; cure behavior
D4603 Inherent viscosity —
D4673 Acrylonitrile-butadiene-styrene (ABS) 2580-1
molding and extrusion materials 2580-2
D4804 Determining the flammability 9773
characteristics of non-rigid solid plastics
D4812 Impact strength, Izod, unnotched cantilever 180
beam testing
D4986 Horizontal burning characteristics of 9772
cellular polymeric materials
D5023-01 Measuring the dynamic mechanical 6721-3
properties of plastics in flexure using
three point bending
D5024-01 Test method for plastics; dynamic —
mechanical properties; in compression
D5025 A laboratory burner used for small-scale IEC 695-11-3
burning tests on plastic materials and 10093