Page 256 - Fiber Fracture

STRENGTH AND FRACTURE OF METALLIC FILAMENTS 239

Flores, K.M. and Dauskardt, R.H. (1999) J. Muter: Res., 14: 638-643.
Forrest, P.G. (1966) Futigue of Metals. Pergamon, Oxford.
Frommeyer, G. and Seifert, K. (1981) 2. Mefallkd., 72: 391-396.
Geminov, V. and Kopyev, I. ( 1979) Fatigue Eng. Mare,: Srrucr., I : 329-33 I.
Gibeling, J.C. and Nix, W.D. (1978) Scr: Metall., 12: 919-926.
Gilbert, C.J.. Lippmann, J.M. and Ritchie, R.O. (1998) Scr: Mater:, 38: 537-542.
Gilman. J.J. (1972) J. Appl. Phys., 44: 675-679.
Grewen, J. (1970) Z. Metuffkd., 61: 252-260.
Hagiwara, M., Inoue, A. and Masumoto, T. (1982a) Metall. Trans. AIME, 13A: 373-382.
Hagiwara. M., Inoue. A. and Masumoto, T. (1982b) Mater: Sci. Eng.. 54 197-207.
Hagiwara, M., Inoue, A. and Masumoto, T. (1985) In: Proc. 5th lnt. Conf Rapidly Quenched Metals, Vol. 2.
pp. 1779-1782, S. Steeb and H. Warlimont (Eds.). North-Holland, Amsterdam.
Hansen, N. and Ralph, B. (1982) Acta Metall., 30: 41 1-417.
Hausmann, K.H. ( 1987) Kurzzeitrekristallisation und mechanische Eigenschaften von Feinstdrahten aus
Gold und Kupfer, These Nr. 702, Ecole Polytechnique Fidirale de Lausanne.
Hausmann, K.H., Ilschner, B. and Kunzi, H.U. (1986) In: Proc. Inr. Con$ Interconnection 7iechnolog.v it7
Electronics, Fellbach, pp. 69-72, Deutscher Verlag fur Schweisstechnik (DVS), Diisseldorf.
Hofbeck, R., Hausmann, K., Ilschner, B. and Kunzi, H.U. (1986) So: Metall., 20: 1601-l605.
Hong, S. and Weil, R. (1996) Thin Solid Films, 283: 175-1 81.
Jin, N.Y. and Winter, A.T. (1984) Acra Mefulf., 32: 989-995.
Judelewicz. M.P. (1993) Etude des propriitis des feuilles minces. Thtse 11 17, Ecole Polytechnique FidBrale
de Lausanne.
Judelewicz. M.P., Kunzi, H.U., Merk, N. and Ilschner, B. (1994) Mater: Sci. Eng., A186: 135-142.
Kim, 1. and Weil, R. (1987) In: Testing of Metallic and Inorganic Coatings, ASTM STF' 947, pp. 11-18.
W.B. Harding and G.A. Bari (Eds.). ASTM, Philadelphia, PA.
Kim, 1. and Weil, R. (1989) Thin Solid Films, 169: 35-42.
Kim, G.H.. Brown, I.B. and Fine, M.E. (1991) Mate,: Sci. Eng., 142: 177.
Kimura, H.. Murata, T. and Masumoto, T. (1977) Sci. Rep. RITW. A, 26 270-282.
Kriinert, W. and Raith, A. (1989) Mate,:-Wiss. Werksrofftechn., 20: 142-148.
Kulawansa. D.M., Dickinson. J.T., Langford, S.C. and Watanabe, Y. (1993) J. Mater: Res., 8: 2543-2553.
Kunzi, H.U. (1983) Mechanical properties of metallic glasses. In: Glassy Metals 11, pp. 167-216, H. Beck
and H.-J. Giintherodt (Eds.). Topics in Applied Physics, Vol. 53, Springer, Berlin.
Kuo, V.W.C. and Starke, E.A. (1985) Metall. Truns., A16: 1089-1 103.
Laird, C.. Charsley, P. and Mughrabi, H. (1986) Mater: Sci. Eng., 81: 433-450.
lan~on, F.. L. Billard and A. Chamberod (1985) In: Proc. 5th lnt. Conf Rapidly Quenched Metals.
Wurzhurg, pp. 1337- 1340. North-Holland, Amsterdam.
Ledmy, H.J.. Chen, H.S. and Wang, T.T. (1972) Metall. Trans., 3: 669.
Lee. D.N. (1995) Scr: Mefall. Mares, 32: 1689.
l.edie. W.C.. Plecity, F.J. and Michalak, J.T. (1961) Trans. Mefall. Soc. AIME, 221: 691-700.
Li. J.C.M. (I 978) Micromechanisms of Defonnution and Frucfure. In: Meruflic Glusses, American Society
for Metals, Metals Park, OH.
Masumoto, T. and Maddin, R. (1971) Actu Metalf., 19: 725.
Masumoto, T.. Inoue, A., Hagiwara, M., Ohnaka. 1. and Fukusako. T. (1981a) In: Proc. 4th Int. Conf:
Rupidfy Quenched Metals. Sendai, pp. 47-5 1.
Masumoto, T., Ohnaka, I., Inoue, A. and Hagiwara, M. (1981b) So: Metulf., 15: 293-296.
Matthys, E.F. (Ed.) (1 992) Melt-Spinning and Strip Custing: Proceedings of the Melt-Spinning and Sfrip
Casting Svmposium, Ssn Diego, CA. The Minerals. Metals and Materials Society, Warrendale. PA.
Megusar. J., Argon, A.S. and Grant, N.J. (1978) Pmceedings offhe 3rd Znternafionaf Conference on Rrr/Jid/y
Quenched Meruls, Metals Society, Brighton.
Megusar, J., Argon, A.S. and Grant, N.J. (1979) MateK Sci. Eng., 38: 63-72.
Merchant, H.D., Minor. M.G. and Liu, Y.L. (1999)J. Electron. Mater:, 28: 998-1006.
Mielnik, E.M. (1991) Metalworking Science and Engineering. McGraw-Hill, New York.
Miyazaki. S., Shibata, K. and Fujita, H. (1979) Acta Mefall., 27: 855-862.