Page 121 - Finite Element Analysis with ANSYS Workbench

112 Chapter 6 Three-Dimensional Solid Analysis

again and select Generate Mesh. A finite element mesh
with three-dimensional elements will appear as shown in
the figure.
 Save the project and close the DM window.

(d) Applying Boundary Conditions, Solving for and Display-
ing Solutions

 Next, the boundary conditions of the fixed left end and the
pressure load can be applied. This will be done, one at a
time, starting from the left end face.
 On the main Project Schematic window, double click on
Setup. Select Analysis Settings under Static Structural.
Select the Supports tab on the upper menu bar and select
Fixed Support item, then select Face icon (box with arrow
and green face). Move the cursor to the left end face and
click at it, this face will become green. Click Apply button
next to the Geometry button.