Page 187 - Finite Element Analysis with ANSYS Workbench

178 Chapter 9 Heat Transfer Analysis

 Repeat the same process to apply boundary condition along
the top edge. This is done by first selecting the Analysis
Settings. Select the Temperature tab on the upper menu
bar, then select Edge icon. Move the cursor to the top edge
and click at it, the bottom edge will become green. Click
Apply button next to the Geometry button, select Function
next to the Magnitude button and enter sin(90*x), and hit
Enter. Note that the Angular Measure of the Function
beneath the Magnitude button herein is set to Degrees, not
in radians.