Page 121 - Finite Element Modeling and Simulations with ANSYS Workbench

106 Finite Element Modeling and Simulation with ANSYS Workbench

Alternative Procedure: Note that the Line Pressure item in the Outline tree can
be copied and pasted under Static Structural (A5) for repeated use. To make
a copy, right-click on a Line Pressure item and select Copy from the menu. To
paste, right-click on the Static Structural (A5) and select Paste. Remember
to apply each newly pasted Line Pressure item to a different line edge on the
Geometry selection in the Details of “Line Pressure” until the same load is
applied to all seven edges.

Step 14: Retrieve Solution
Insert a Total Deformation item by right-clicking on Solution (A6) in the Outline
tree.

Insert a Beam Tool item by right-clicking on Solution (A6) in the Outline tree.