Page 119 - Finite Element Modeling and Simulations with ANSYS Workbench

104 Finite Element Modeling and Simulation with ANSYS Workbench

Step 12: Apply Boundary Conditions
In the Outline of Project, right-click on Static Structural (A5) and select Insert
and then Fixed Support. After completion, a Fixed Support item is added
underneath Static Structural (A5) in the project outline tree.

Select the six points as shown below in the Graphics Window. In the Details
of “Fixed Support”, click Apply to confirm on the Geometry selection. After
completion, a Fixed Support boundary condition will be added to the selected
six points.