Page 114 - Finite Element Modeling and Simulations with ANSYS Workbench
P. 114
Beams and Frames 99
Click Create on Prepare tab to create beams from the selected lines using the
I-beam cross-section provided. This will bring up a Beams folder in the
Structure Tree to replace the previous Curves folder. The Beams folder con-
tains 26 Beams (I-beam) as shown below.
Step 9: Move all Beams to a New Component
Click Select on the Design tab, and select all 26 Beams in the Structure Tree.
To select all beams in the tree, click the first Beam, and hold Shift key and
click the last Beam. The selected beams will be highlighted in yellow as shown
below.
