Page 111 - Finite Element Modeling and Simulations with ANSYS Workbench
P. 111
96 Finite Element Modeling and Simulation with ANSYS Workbench
Step 6: Create Lines in 3D Space
Click on the Line icon from the toolbar, and then click 3D mode to switch to 3D
sketching. To draw a line in 3D, click a start point and then an end point. Press
Esc after each line creation. Draw the 6 lines that connect the two sides of the
frame, as shown below. Right-click Surface from the Structure Tree, and select
Edit Sketch from the drop-down context menu to remove unwanted surfaces.
The following will appear afterwards, where 26 lines are included under Curves
in the Structure Tree.
