Page 187 - Finite Element Modeling and Simulations with ANSYS Workbench
P. 187
172 Finite Element Modeling and Simulation with ANSYS Workbench
Mouse over x-y plane, and click to select the highlighted x-y plane. This will
change the sketch plane from the default x-z plane (shown above) to the x-y
plane (shown below).
Click Plan View on the toolbar to view the sketch grid head-on. Click Sketch
Mode on the Design tab to begin a sketch. Click on the Line icon. Draw a
closed-loop line profile as dimensioned below. When necessary, press the Esc
key to end the line creation.
