Page 249 - Finite Element Modeling and Simulations with ANSYS Workbench
P. 249
234 Finite Element Modeling and Simulation with ANSYS Workbench
Click on the Pull icon on the Design tab. In the Graphics Window, click on the
rectangular surface as shown below. Then, click on the Pull Direction icon,
and click on the Z-axis.
Next, click on the Revolve icon right next to the highlighted Z-axis to set it as the
axis to revolve the pattern about. In the Graphics Window, Pull the surface
pattern up along the yellow pull arrow, and enter 90 degrees in the text box as
shown below to generate the tripod base geometry.
