Page 275 - Finite Element Modeling and Simulations with ANSYS Workbench

260 Finite Element Modeling and Simulation with ANSYS Workbench

steel with Young’s modulus E = 200 GPa and Poisson’s ratio ν = 0.3. The pro-
file sketches of the yoke and the u-shape are shown in the figure below. Both
components have an extrusion depth of 5 cm. In the half model, the pin has a
diameter of 2 cm and a length of 8 cm, and is centered 2.5 cm away from both
the front and the side faces of the u-shape. Suppose that the yoke is fixed on the
left end, and the u-shape is pulled by a pressure load of 100 N/cm on the right
2
end. Compute the stresses in the assembly using the FEA.
All dimensions are in centimeters.
1.500 2.000 Use no separation for all contact regions.
12.000

R1.500 R1.500
16.000
1.500
3.000
8.000 2.000
3.000
2.000

R1.000 2.500

2.500