Page 396 - Finite Element Modeling and Simulations with ANSYS Workbench
P. 396
Design Optimization 381
Click Plan View on the toolbar to view the sketch grid head-on.
Click Sketch Mode on the Design tab to begin a sketch. Click on the Line icon.
Draw a sketch of the L-shape on the XY Plane, as shown below. To draw a line,
click a start point and then an end point in the sketch grid. The horizontal
distance is 35mm betweem Points 1 and 2, and 15mm between Points 5 and
6, respectively. The vertical distance is 35mm betweem Points 1 and 6, and
15mm between Points 2 and 3, respectively. When necessary, press the Esc key
to end the line creation.
