Page 108 - Fluid Mechanics and Thermodynamics of Turbomachinery

Two-dimensional Cascades 89
Bryer, D. W. and Pankhurst, R. C. (1971). Pressure-probe Methods for Determining Wind
Speed and Flow Direction. National Physical Laboratory, HMSO.
Came, P. M. (1973). Secondary loss measurements in a cascade of turbine blades. Proc.
Instn. Mech. Engrs. Conference Publication 3.
Carter, A. D. S. (1950). Low-speed performance of related aerofoils in cascade. ARC. Current
Paper, No. 29.
Carter, A. D. S., Andrews, S. J. and Shaw, H. (1950). Some fluid dynamic research tech-
niques. Proc. Instn. Mech. Engrs., 163.
Carter, A. D. S. (1948). Three-dimensional flow theories for axial compressors and turbines.
Proc. Instn. Mech. Engrs., 159.
Csanady, G. T. (1964). Theory of Turbomachines. McGraw-Hill, New York.
Dixon, S. L. (1978). Measurement of flow direction in a shear flow. J. Physics E: Scientific
Instruments, 2,31 4.
Dowden, R. R. (1972). Fluid Flow Measurement a Bibliography. BHRA.
Dunham, J. (1970). A review of cascade data on secondary losses in turbines. J. Mech. Eng.
Sci., 12.
Dunham, J. (1974). A parametric method of turbine blade profile design. Am. Soc. Mech.
Engrs. Paper 74-GT-119.
Dunham, J. and Came, P. (1970). Improvements to the Ainley-Mathieson method of turbine
performance prediction. Trans. Am. Soc. Mech. Engrs., Series A, 92.
Felix, A. R. (1957). Summary of 65-Series compressor blade low-speed cascade data by use
of the carpet-plotting technique. NACA T.N. 3913.
Glauert, H. (1959). Aerofoil and Airscrew Theory. (2nd edn). Cambridge Univer-
sity Press.
Hay, N., Metcalfe, R. and Reizes, J. A. (1978). A simple method for the selection of axial
fan blade profiles. Proc. Instn Mech Engrs., 192, (25) 269 75.
Herrig, L. J., Emery, J. C. and Erwin, J. R. (1957). Systematic two-dimensional cascade tests
of NACA 65-Series compressor blades at low speeds. NACA T.N. 3916.
Hodson, H. P. (1984). Boundary layer and loss measurements on the rotor of an axial-
flow turbine. J. Eng. for Gas Turbines and Power. Trans Am. Soc. Mech. Engrs., 106,
391 9.
Horlock, J. H. (1958). Axial Flow Compressors. Butterworths. (1973 reprint with supple-
mental material, Huntington, New York: Krieger).
Horlock, J. H. (1966). Axial-flow Turbines. Butterworths. (1973 reprint with corrections,
Huntington, New York: Krieger).
Howell, A. R. (1942). The present basis of axial flow compressor design: Part I, Cascade
theory and performance. ARC R and M. 2095.
Howell, A. R. (1945). Design of axial compressors. Proc. Instn. Mech. Engrs., 153.
Howell, A. R. (1945). Fluid dynamics of axial compressors. Proc. Instn. Mech. Engrs., 153.
Lieblein, S. (1959). Loss and stall analysis of compressor cascades. Trans. Am. Soc. Mech.
Engrs., Series D, 81.
Lieblein, S. and Roudebush, W. H. (1956). Theoretical loss relation for low-speed 2D cascade
flow. NACA T.N. 3662.
Lopatitskii, A. O. et al. (1969). Energy losses in the transient state of an incident flow on
the moving blades of turbine stages. Energomashinostroenie, 15.
McKenzie, A. B. (1980). The design of axial compressor blading based on tests of a low
speed compressor. Proc. Instn. Mech. Engrs., 194,6.
McKenzie, A. B. (1988). The selection of fan blade geometry for optimum efficiency. Proc.
Instn. Mech. Engrs., 202, A1, 39 44.