Page 547 - Handbook of Electrical Engineering

538 HANDBOOK OF ELECTRICAL ENGINEERING

Device Definition and Function
Number
It should be noted that this function is assigned only to a relay which detects the flow
of current from the frame of a machine or enclosing case or structure of a piece of
apparatus to ground, or detects a ground on a normally ungrounded winding or
circuit. It is not applied to a device connected in the secondary circuit or secondary
neutral of a current transformer, or in the secondary neutral of current transformer,
connected in the power circuit of a normally grounded system.
65 Governor is the assembly of fluid, electrical or mechanical control equipment used
for regulating the flow of water, steam, or other medium to the prime mover for
such purposes as starting, holding speed or load, or stopping.
67 AC directional overcurrent relay is a relay that functions on a desired value of AC
overcurrent flowing in a predetermined direction.
74 Alarm relay is a device other than an annunciator, which is used to operate, or to
operate in connection with, a visual or audible alarm.
81 Frequency relay is a relay that functions on a predetermined value of
frequency – either under or over or on normal system frequency – or rate of
change of frequency.
86 Locking-out relay is an electrically operated, hand or electrically reset, relay that
functions to shut down and hold an equipment out of service on the occurrence of
abnormal conditions.
87 Differential protective relay is a protective relay that functions on a percentage or
phase angle or other quantitative difference of two currents or of some other
electrical quantities.