Page 387 - Handbook of Materials Failure Analysis

References 385

[31] Davidson JA, Imhof EJ. A fracture-mechanics and system-stiffness approach to fatigue
performance of spot-welded sheet steels. Detroit, MI: SAE International Congress and
Exposition; 1983.
[32] Barsom John M, Rolfe Stanley T. Fracture and fatigue control in structures—application
of fracture mechanics. Upper Saddle River, NJ: Prentice Hall; 1987.
[33] Wang PC, Ewing KW. Fracture mechanics analysis of fatigue resistance of spot welded
coach-peel joints. Fatigue Fract Eng Mater Struct 1991;14:915–30.
[34] McMahon JC, Lawrence FV. Fatigue crack initiation and early growth in tensile-shear
spot weldments. Champaign, IL: University of Illinois at Urbana-Champaign; 1986.
[35] Long X, Khanna SK. Fatigue properties and failure characterization of spot welded high
strength steel sheet. Int J Fatigue 2007;29:879–86.
[36] Gean A, Westgate SA, Kucza JC, Ehrstrom JC. Static and fatigue behavior of spot-
welded 5182-0 aluminum alloy sheet. Weld J 1999;78:80s–86s.
[37] Behravesh SB, Jahed H, Lambert S. Characterization of magnesium spot welds under
tensile and cyclic loadings. Mater Des 2011;32:4890–900.
[38] Hobbacher A. Recommendations for fatigue design of welded joints and components.
Jordan: International Institute of Welding; 2004, IIW document XIII-1965-03/XV-
1127-03.
[39] Wang PC, Corten HT, Lawrence FV. A fatigue life prediction method for tensile-shear
spot welds. Detroit, MI: SAE International Congress and Exposition; 1985.
[40] Radaj D. Hot spot stress concept for spot-welded joints. Structural design and crashwor-
thiness of automobiles. New York: Springer-Verlag; 1987, p. 149–70.
[41] Kuang JH, Liu AH. A study of the stress concentration factor on spot welds. Weld J
1990;69:468s–74s.
[42] He X, Pearson I, Young K. Self-pierce riveting for sheet materials: state of the art.
J Mater Process Technol 2008;199:27–36.
[43] Fu M, Mallick PK. Effect of process variables on the static and fatigue properties of
self-piercing riveted joints in aluminum alloy 5754. Detroit, MI: SAE World Congress;
2001.
[44] Kochan A. Audi moves forward with all-aluminium cars. Assem Autom 2000;20:132–5.
[45] Mortimer J. Jaguar uses castings, extrusions to reduce parts count in new sports car.
Assem Autom 2006;26:115–20.
[46] LaPensee M. Self-pierce riveting technology: a joining solution for light metals. Light
Metal Age 2003;61:32–5.
[47] Hoang NH, Porcaro R, Langseth M, Hanssen AG. Self-piercing riveting connections
using aluminium rivets. Int J Solids Struct 2010;47:427–39.
[48] Barnes TA, Pashby IR. Joining techniques for aluminium spaceframes used in automo-
biles: part I—solid and liquid phase welding. J Mater Process Technol 2000;99:62–71.
[49] Durandet Y, Deam R, Beer A, Song W, Blacket S. Laser assisted self-pierce riveting of
AZ31 magnesium alloy strips. Mater Des 2010;31:S13–S16.
[50] Lou X, Li M, Boger R, Agnew S, Wagoner R. Hardening evolution of AZ31B Mg sheet.
Int J Plast 2007;23:44–86.
[51] Yukutake E, Kaneko J, Sugamata M. Anisotropy and non-uniformity in plastic behavior
of AZ31 magnesium alloy plates. Mater Trans 2003;44:452–7.
[52] Xu S, Tyson W, Shen G, Eagleson R, Balmy A. Uniaxial deformation, charpy and frac-
ture toughness testing of extruded magnesium alloy AM30. Detroit, MI: SAE World
Congress & Exposition; 2010.