Page 441 - Handbook of Materials Failure Analysis

References 439

[91] Puchi-Cabrera ES, Matinez F, Herrera I, Berrios JA, Dixit S, Bhat D. On the fatigue
behavior of an AISI 316L stainless steel coated with a PVD TiN deposit. Surf Coat
Technol 2004;182:276–86.
[92] Puchi-Cabrera ES, Staia MH, Quinto DT, Villalobos-Gutierrez C, Ochoa-Perez E.
Fatigue properties of a SAE 4340 steel coated with TiCN by PAPVD. Int J Fatigue
2007;29:471–80.
[93] Shiozawa K, Nishino S, Handa K. The influence of applied stress ratio on fatigue
strength of TiN-coated carbon steel. JSME Int J (Series I) 1992;35:347–53.
[94] Su YL, Yao SH, Wei CS, Wu CT. Tension and fatigue behavior of a PVD TiN-coated
material. Thin Solid Films 1998;315:153–8.
[95] Su YL, Yao SH, Wei CS, Wu CT. Evaluation on the tension and fatigue behavior of
various PVD coated materials. Thin Solid Films 1998;322:218–24.
[96] Su YL, Yao SH, Wei CS, Kao WH, Wu CT. Influence of single- and multilayer TiN
films on the axial tension and fatigue performance of AISI 1045 steel. Thin Solid Films
1999;338:177–84.
[97] Trapezon AG, Lyashenko BA. Effect of the deposition and thickness parameters of tita-
nium nitride (TiN) coatings on the fatigue strength. Strength Mater 2010;42:675–82.
[98] Xin L, Liu P, Feng C, Zhu S, Wang F. Fatigue behavior of (graded) (Ti, Al)N-coated
1Cr11Ni2W2MoV stainless steel at high temperature. Surf Coat Technol
2010;204:2417–23.
[99] Costa MYP, Venditti MLR, Cioffi MOH, Voorwald HJC, Guimaraes VA, Ruas R.
Fatigue behavior of PVD coated Ti–6Al–4V alloy. Int J Fatigue 2011;33:759–65.
[100] Baragetti S, La Vecchia GM, Terranova A. Variables affecting the fatigue resistance of
PVD-coated components. Int J Fatigue 2005;27:1541–50.
[101] Chen Z-Y, Zhao J, Meng X-H, Li J-M. Evaluation of fatigue resistance of a gradient
CrNx coating applied to turbine blades. Mater Sci Eng A 2010;527:1436–43.
[102] Zhou Y, Rao GB, Wang JQ, Zhang B, Yu ZM, Ke W, et al. Influence of Ti/TiN
bilayered and multilayered films on the axial fatigue performance of Ti46Al8Nb alloy.
Thin Solid Films 2011;519:2207–12.
[103] Lecis N, La Vecchia GM, Boniardi M, D’Errico F. Fatigue behavior of duplex-treated
samples coated with Cr(C, N) film. Surf Coat Technol 2006;201:2335–40.
[104] Sundaram VS. Diamond like carbon film as a protective coating for high strength steel
and titanium alloy. Surf Coat Technol 2006;201:2707–11.
[105] Cassar G, Wilson JCA-B, Banfield S, Housden J, Fenech M, Matthews A, et al. Eval-
uating the effects of plasma diffusion processing and duplex diffusion/PVD-coating on
the fatigue performance of Ti–6Al–4V alloy. Int J Fatigue 2011;33:1313–23.
[106] Kolkman HJ. Effect of TiN/Ti gas turbine compressor coatings on the fatigue strength
of Ti-6Al-4V base metal. Surf Coat Technol 1995;72:30–6.
[107] Murakami R, Takeuchi T, Yano T, Katsumura M. Effect of TiN film thickness on
fatigue strength for the steel modified by dynamic mixing method. Am Soc Mech
Eng 1992;2:655–9.
[108] Ganne T, Crepin J, Serror S, Zaoui A. Cracking behaviour of PVD tungsten coatings
deposited on steel substrates. Acta Mater 2002;50:4149–63.
[109] Scafidi P, Ignat MJ. Cracking and loss of adhesion of Si 3 N 4 and SiO 2 : P films deposited
on Al substrates. J Adhes Sci Technol 1998;12:1219–42.
[110] Carvalho NJM, Huis in’t Veld AJ, Hosson JTD. Interfacial fatigue stress in PVD TiN
coated tool steels under rolling contact fatigue conditions. Surf Coat Technol
1998;105:109–16.