Page 53 - Handbook of Materials Failure Analysis

46 CHAPTER 2 Failure analysis in chemical industries

REFERENCES
[1] Pasman HJ. Will a safe process be sufficient or do we have to do a bit more? In: 13th
international symposium on loss prevention and safety promotion in the process indus-
tries, 1, Bruges, June 6-9; 2010. p. 17–21.
[2] Sales J, Mushtaq F, Christou MD, Nomen R. Study of major accidents involving chem-
ical reactive substances, analysis and lessons learned, trans IChemE, Part B. Process Safe
Environ Prot 2007;85(B2):117–24.
[3] Kamarizan K, Markku H. Analysis of equipment failures as contributors to chemical
process accidents. Process Safe Environ Prot 2013;91(1–2):61–78.
[4] Fuchino T, Takeda K, Kitajima T, Shimad Y. Analysis of root causes for chemical
accidents basis on business process model for plant maintenance. Chem Eng Trans
2013;31:175–80.
[5] Kamarizan K, Markku H. Method for identifying contributors to chemical process
accidents. Process Safe Environ Prot 2013;91:367–77.
[6] Sattari-Far I, Moalemi M. Failure of stainless digester shafts in a paper production plant.
Eng Fail Anal 2003;10(6):675–768.
[7] Tavares SSM, Anchieta V, Lea ˜o ERC, da Silva MR, Mace ˆdo MCS. Failure analysis
of PSV spring in off shore gas production pipeline. Eng Fail Anal 2013;32:23–34.
[8] Deen KM, hussain Khan I, Ghauri KM. Failure of crude oil heater tubes. JPIChE
2011;39(1):89–93.
[9] Xu S, Wang C, Wang W. Failure analysis of stress corrosion cracking in heat exchanger
tubes during start-up operation. Eng Fail Anal 2015;51:1–8.
[10] Hadianfard MJ. Failure in a high pressure feeding line of an oil refinery due to hydrogen
effect. Eng Fail Anal 2010;17(4):873–81.
[11] Das G, Chowdhury SG, Ray AK, Das S, Bhattacharaya DK. Failure of a super heater
tube. Eng Fail Anal 2002;9(5):563–70.
[12] Khodamorad SH, Haghshenas Fatmehsari D, Rezaie H, Sadeghipour A. Analysis of
ethylene cracking furnace tubes. Eng Fail Anal 2012;21:1–8.
[13] Deen KM, Khan IH, Ahmad R, Rizvi ZH, Ahmad J. Remaining life assessment of
platforming reactor vessels. Eng Fail Anal 2011;18(4):1247–52.
[14] Virk MA, Butt MA, Chughtai A, Ahmad M, Khan IH, Deen KM. Failure analysis of heat
exchanger fluid vapor phase vent lines in a polyester plant. Eng Fail Anal 2010;17
(2):447–54.
[15] Deen KM, Virk MA, Haque CI, Ahmad R, Khan IH. Failure investigation of heat
exchanger plates due to pitting corrosion. Eng Fail Anal 2010;17(4):886–93.
[16] Otegui JL, Rivas A, Manfredi C, Martins C. Weld failures in sleeve reinforcements of
pipelines. Eng Fail Anal 2001;8(1):57–73.
[17] Das G, Ray AK, Ghosh S, Das SK, Bhattacharya DK. Fatigue failure of a boiler feed
pump rotor shaft. Eng Fail Anal 2003;10(6):725–32.
[18] Wang C, Cui Y, Voloshin A. Failure of a valve rod caused by improper heat treatment
and metallurgy. Eng Fail Anal 2002;9(5):489–94.
[19] Muhammad W, Deen KM. Failure analysis of water pump shaft. J Fail Anal Prev
2010;10(2):161–6.
[20] Proverbio E, Bonaccorsi LM. Erosion-corrosion of a stainless steel distillation column in
food industry. Eng Fail Anal 2002;9(6):613–20.