Page 97 - Handbook of Materials Failure Analysis

References 91

[24] Łabanowski J. Evaluation of reformer tubes degradation after long term operation.
J Achiev Mater Manuf Eng 2010;43/1:244–51.
[25] Thomas CW, Tack AJ, Briggs N. Stress relaxation properties of alloy HP50Nb and their
application to life assessment of reformer furnace tubing. Int J Press Vessel Pip
1997;70:59–68.
[26] Widrig JR. New technology for inspecting critical in-plant piping service. Process Saf
Prog 2011;34(4):334–7.
[27] Widrig JR. The challenge of inspection and assessment of critical piping systems in
chemical plants. Insp Eng J 2013;20(4):13–6.
[28] Roberts RD. All inclusive approach for steam reformers inspection methods. NDTnet
2005;10(3).
[29] http://www.youtube.com/watch?v¼QHfp16I9FXQ.
[30] Bonaccorsi L, Guglielmino E, Pino R, Servetto C, Sili A. Damage analysis in Fe-Cr-Ni
centrifugally cast alloy tubes for reforming furnaces. Eng Fail Anal 2014;36:65–74.
[31] Bonaccorsi L, Guglielmino E, Pino R, Sili A, Chiofalo G, De Marco M, et al. Creep dam-
age and metallurgical characterization of high alloyed reformer tubes after long service
time. In: ECCC—creep & fracture conference 2014, Rome, May 5–7; 2014.
[32] Guglielmino E, Pino R, Servetto C, Sili A. Damage investigation on welded tubes of a
reforming furnace. La Metallurgia Italiana 2015;1:53–8.
[33] Kenik EA, Maziasz PJ, Swindeman RW, Cervenka J, May D. Structure and phase sta-
bility in a cast modified-HP austenite after long term ageing. Scr Mater 2003;49:117–22.
[34] Mostafaei M, Shamanian M, Purmohamad H, Amini M, Saatchi A. Microstructural deg-
radation of two cast heat resistant reformer tubes after long term service exposure. Eng
Fail Anal 2011;18:164–71.
[35] Voicu R, Lacaze J, Andrieu E, Poquillon D, Furtado J. Creep and tensile behaviour of
austenitic Fe–Cr–Ni stainless steels. Mater Sci Eng A 2009;510–511:185–9.