Page 58 - Handbook of Plastics Technologies

INTRODUCTION TO POLYMERS AND PLASTICS

1.44 CHAPTER 1

26. R.A. Malloy, Plastic Part Design for Injection Molding, Carl Hanser Verlag, Munich, 1994, p.
20.
27. G. Pötsch and W. Michaeli, Injection Molding, Hanser Publishers, Munich, Germany, 1995, p.
115.
28. G. Pötsch and W. Michaeli, Injection Molding, Hanser Publishers, Munich, Germany, 1995, p.
133.
29. G. Pötsch and W. Michaeli, Injection Molding, Hanser Publishers, Munich, Germany, 1995, p.
135.
30. R.A. Malloy, Plastic Part Design for Injection Molding, Carl Hanser Verlag, Munich, 1994, p.
120.
31. A.B. Strong, Plastics: Materials and Processing, Prentice-Hall, New Jersey, 1996.
32. J.L. Throne, Technology of Thermoforming, Carl Hanser Verlag, Munich, 1996.
33. M.L. Berins, Plastics Engineering Handbook of the Society of the Plastics Industry, 5th ed.,
Chapman and Hall, New York, 1991, p. 383.
34. J.L. Throne, Technology of Thermoforming, Carl Hanser Verlag, Munich, 1996, pp. 17–19.
35. J.L. Throne, Technology of Thermoforming, Carl Hanser Verlag, Munich, 1996, pp. 19–22.
36. A.W. Birley, B. Haworth, and J. Batchelor, Physics of Plastics, Carl Hanser Verlag, Munich,
1992, p. 229.
37. A.W. Birley, B. Haworth, and J. Batchelor, Physics of Plastics, Carl Hanser Verlag, Munich,
1992, p. 230.
38. Michaeli, W., Plastics Processing, An Introduction, Hanser/Gardner Publications, New York,
1992, p. 102.
39. Osswald, T.A., Polymer Processing Fundamentals, Hanser/Gardner Publications, New York,
1998, pp. 149 and 151.
40. Osswald, T.A., Polymer Processing Fundamentals, Hanser/Gardner Publications, New York,
1998, p. 176.
41. H. Hurnik, “Chemical Blowing Agents” in Plastics Additives, 4th ed., R. Gächter and H. Müller,
Eds., Carl Hanser Verlag, Munich, 1993.
42. Berins, M.L., Plastics Engineering Handbook of the Society of the Plastics Industry, 5th ed.,
Chapman and Hall, New York, 1991, p. 553.
43. Berins, M.L., Plastics Engineering Handbook of the Society of the Plastics Industry, 5th ed.,
Chapman and Hall, New York, 1991, p. 555.
44. Berins, M.L., Plastics Engineering Handbook of the Society of the Plastics Industry, 5th ed.,
Chapman and Hall, New York, 1991, p. 559.
45. M.L. Berins, Plastics Engineering Handbook of the Society of the Plastics Industry, 5th ed.,
Chapman and Hall, New York, 1991, p. 593.
46. M.L. Berins, Plastics Engineering Handbook of the Society of the Plastics Industry, 5th ed.,
Chapman and Hall, New York, 1991, pp. 593-599.
47. M.L. Berins, Plastics Engineering Handbook of the Society of the Plastics Industry, 5th ed.,
Chapman and Hall, New York, 1991, pp. 600-605.
48. L.H. Van Vlack, Elements of Materials Science and Engineering, 3rd ed., Addison-Wesley, Read-
ing, MA, 1975.
49. R.R. Maccani, “Characteristics Crucial to the Application of Engineering Plastics,” in Engineer-
ing Plastics, Vol. 2, Engineering Materials Handbook, ASM International, Metals Park, OH,
1988, p. 69.
50. Berins, M.L., Plastics Engineering Handbook of the Society of the Plastics Industry, 5th ed.,
Chapman and Hall, New York, 1991, p. 48-49.
51. H.P. Schlumpf, “Fillers and Reinforcements”, in Plastics Additives, 4th ed., R. Gächter and H.
Müller, Eds., Carl Hanser Verlag, Munich, 1993.
52. Morton-Jones, D. H., Polymer Processing, Chapman Hall, New York (1989), 35.
53. T. Whelan and J. Goff, The Dynisco Injection Molders Handbook, 1st ed., Dynisco, ©T. Whelan
and J. Goff, 1991.
54. http://www.mgstech.com/multishot_molding/materials/battenfeld_plastic_bonding_chart.gif.
55. Berins, M.L., Plastics Engineering Handbook of the Society of the Plastics Industry, 5th ed.,
Chapman and Hall, New York, 1991, p. 405.
56. H. Hurnik, “Chemical Blowing Agents,” in Plastics Additives, 4th ed., R. Gächter and H. Müller,
Eds., Carl Hanser Verlag, Munich, 1993.

Downloaded from Digital Engineering Library @ McGraw-Hill (www.digitalengineeringlibrary.com)
Copyright © 2006 The McGraw-Hill Companies. All rights reserved.
Any use is subject to the Terms of Use as given at the website.